| 1 |
R. G. Reddy, S. P. Pedneker and P. K. Rao: "Kinetics of
Decarburization of Fe-C-Cr Alloys," Trans. Ind. Inst. of Metals, Vol.
29, No. 6, p. 426-431, 1976. |
|
2 |
R. G. Reddy: "Electroslag Remelting of Copper and Copper Alloys,"
Tech. Notes in Metallurgy, University of Utah, Vol. 3, No. 1, p. 9,
1978. |
| 3 |
R. G. Reddy: "Application of Thermodynamic Data to Selection of
Refractory Crucibles for Melting of High-temperature Materials," Tech.
Notes in Metallurgy, University of Utah, Vol.3, No. 4, p. 26-31, 1978. |
|
4 |
R. G. Reddy and G. W. Healy: "Distribution of Cobalt Between Liquid
Copper and Copper Silicates," TMS paper selection, TMS, paper No.
A80-45, pp.1-21, 1980. |
| 5 |
R. G. Reddy and G. W. Healy: "The Solubility of Cobalt in
Cu2O-CoO-SiO2 Slags in Equilibrium with Liquid Cu-Co Alloys," Can.
Met. Quart., Vol. 20(2), pp. 135-143, 1981. |
|
6 |
R. G. Reddy and G. W. Healy: "Distribution of Between Liquid Copper
and Copper Silicate Slag at 1523 K," Met. Trans. B, Vol. 12, pp.
509-516, 1981. |
| 7 |
R. G. Reddy: "The Recovery of Nonferrous Metals from Primary Copper
Smelter Discard Slags," Resources and Conservation, International
Journal, Vol. 9, pp. 333-342, 1982. |
|
8 |
R. G. Reddy: "The Concentration of Impurity Elements from
Reverberatory Slags," U. S. Department of the Interior, Bureau of
Mines Report, 1982. |
| 9 |
R. G. Reddy and L. L. Oden: "Recovery of Copper from Industrial Copper
Reverberatory Slags," Advances in Sulfide Smelting, Proceedings, ed.
by H.Y. Sohn, D.B. George, A.D. Zunkel, TMS, Vol. 1, pp. 329-356,
1983. |
|
10 |
R. G. Reddy and C. C. Acholonu: "Activity Coefficient of CuO0.5
in Alumina Saturated Iron Silicate Slags," Metallurgical Transactions,
Vol. 15B, pp. 345-349, 1984. |
| 11 |
R.
G. Reddy and C. C. Acholonu: "Distribution of Nickel between
Copper-Nickel and Alumina saturated Iron Silicate Slags,"
Metallurgical Transactions, Vol. 15B, pp. 33-37, 1984. |
|
12 |
P. Sahoo and R.G. Reddy: "Activity of Nickel Oxide in Fe0-Fe01.5-NiO-AlO1.5-SiO2
Slags at 1523 K," TMS Paper Selection, TMS, Paper No. 84-40, p. 1-14,
1984. |
| 13 |
P. Sahoo and R. G. Reddy: "The Thermodynamic Activity of NiO in
Alumina-Saturated Iron Silicate Slags at 1573K," International
Symposium on Slags and Fluxes, ed. by H.A.Fine and D.R. Gaskell, TMS,
pp. 533-545, 1984. |
|
14 |
R. G. Reddy: "Mineral Waste Treatment and Recovery," Journal of
Metals, Vol. 37 (4), pp. 69-73, April, 1985. |
| 15 |
R. G. Reddy: "Solubility of Cobalt in Copper Smelting and Refining
Slags," Proceedings, Second Congress, "Cobalt Metallurgy and Uses,"
Cobalt Development Institute, England, pp. 89-105, 1985. |
|
16 |
R. G. Reddy: "Nitride Formation in Liquid Iron Alloys Under Conditions
of Electron Beam Melting," Proceedings of the Conference, Electron
Beam Melting and Refining State of the Art 1985, ed. by R. Bakish, BM
Inc., NJ, Vol. 2, pp. 3951, 1985. |
| 17 |
R. G. Reddy and V. L. Prabhu: "Treatment of Smelting Slags for
Recovery of Valuable Metals," Recycle and Secondary Recovery of
Metals, Proceedings, ed. by P. R. Taylor, H. Y. Sohn and N. Jarrett,
TMS, pp. 575-588, 1985. |
|
18 |
R. K. Mishra and R. G. Reddy: "Pyrometallurgical Processing and
Recovery of Precious Metals from Autocatalysts Using Plasma Arc
Smelting," Precious Metals-Proceedings of the Tenth International
Precious Metals Institute Conference, ed. by U.V. Rao, IPMI, pp.
217-230, 1986. |
| 19 |
R. G. Reddy: "Mineral Waste Treatment and Secondary Recovery,"
Journal
of Metals, Vol. 38 (4), pp. 49-55, 1986. |
|
20 |
F. Gordaninjad, R. G. Reddy, and S. D. Cromwell: "Microscopic
Characterization and Finite Element Stress Analysis of Residual
Inclusions in Carbon Steels," Effects and Control of Inclusions and
Residuals in Steels, Canadian Institute of Metallurgy, Series 25-4/5,
pp. III-1-III-18, 1986. |
| 21 |
R. G. Reddy and M. Blander: "Modeling of Sulfide Capacities of
Silicate Melts," Metallurgical Transactions, Vol. 38, pp. 591-596,
1987. |
|
22 |
R. K. Mishra and R. G. Reddy: "Recovery of Precious Metals by
Pyrometallurgical Processing of Electronic Scrap," Precious Metals,
IPMI, ed. by G. Vermeylen and R. Verbeeck, pp. 135-146, 1987. |
| 23 |
R. G. Reddy: "Metal, Mineral Waste processing and Secondary Recovery,"
Journal of Metals, Vol. 39 (4), pp. 34-38, 1987. |
|
24 |
R. G. Reddy, M. Blander and B. Chen: "Thermodynamic Prediction of
Sulfide Capacities in Na2O-SiO2 Melts,"
International Symposium on Molten Salts, The Electrochemical Society,
pp. 156-164, 1987. |
| 25 |
R. G. Reddy: "Metal, Mineral Waste Processing and Secondary Recovery,"
Journal of Metals, Vol. 40 (4), pp. 46-51, 1988. |
|
26 |
H. Hu and R. G. Reddy: "Viscosities of Binary Silicate Melts,"
International Symposium on Casting of Near Net Shape Products, TMS,
Warrendale, PA, USA, pp. 705-722, 1988. |
| 27 |
P. Fisher, R.G. Reddy and R.K. Mishra: "Recovery of Gold and
characterization of Gold Polishing Powders," Precious Metals, IPMI,
ed. by R.M. Nadkarni, pp. 203-212, 1988. |
|
28 |
E. Maurice, Jr. and R. G. Reddy: "Solubility and Activity Coefficient
of Y2O3 in Fluoride Melts," Rare Earths, ed. by
R.G. Bautista and M.M. Wang, TMS, pp. 377-388, 1989. |
| 29 |
H. Hu and R. G. Reddy: "Viscosity of Spent Potliner," Light Metals,
ed. by P.G. Campbell, TMS, pp. 801-803, 1989. |
|
30 |
R. G. Reddy: "Metal, Mineral Waste Processing and Secondary Recovery,"
Journal of Metals, Vol. 41(4), pp. 66-69, 1989. |
| 31 |
R. G. Reddy and M. Blander: "Sulfide Capacities of Mn0-Si02
Melts," Metall. Mater. Trans. B., Vol. 20, pp.137-140, 1989. |
|
32 |
B. Chen, R. G. Reddy, and M. Blander: "Sulfide Capacities of
CaO-FeO-SiO2 Slags," 3rd International Conference on Molten
Slags and Fluxes, The Institute of Metals, IMM, pp.270-272, 1989. |
| 33 |
N. H. Mood-Noor and R. G. Reddy: "Oxidation of WO2
Powders," Physical Chemistry of Powder Metals Production and
Processing, ed. by W. Murry Small, TMS, pp.473-488, 1989. |
|
34 |
E. Maurice Jr. and R. G. Reddy: "Solubility of Rare earth oxides in
Fluoride Melts", High Temp. Mater. Chem., LBL-27905, Berkeley,
CA, pp. 31-35, 1989. |
| 35 |
H. Hu and R. G. Reddy: "Modeling of Viscosities of Binary
Alkaline-Earth Metal Oxide and Silica Melts," High Temp. Sci.,
Vol. 28, pp.195-202, 1990. |
|
36 |
R. G. Reddy and L. Brewer: "Thermodynamic Properties of
Titanium-Aluminum Alloys," LBL Publications, Berkeley, CA, pp. 7,
1990. |
| 37 |
B. Chen and R. G. Reddy: "Roasting Characteristics of Refractory Gold
Ores," Gold Tech 4, SME, Littleton, CO, USA, pp.201-214, 1990. |
|
38 |
V. L. Prabhu and R. G. Reddy: "Zinc Fuming from Slags-A steady state
volatilization Model," International Symposium on Recycling of Metals
and Engineered Materials, ed. by J.H. Vanlinden, D.L. Stewart and Y.
Sahai, TMS, pp.361-370, 1990. |
| 39 |
R. G. Reddy: "Kinetics of TiN Dissolution in Ti Alloys," Proceedings
of Electron Beam Melting and Refining, ed. by R. Bakish, BM Inc., NJ,
pp. 119-127, 1990. |
|
40 |
R. G. Reddy and K. Hebbar : "Prediction of Viscosities of Binary
Silicate Melts," EPD-Congress, TMS, de. By D.R. Gaskell, pp.523-540,
1991. |
| 41 |
K. Hebbar and R. G. Reddy: "Viscosities of FeO-SiO2 slags,"
SME-AIME, 91-55, 1991. |
|
42 |
R. G. Reddy and A. Narayan: "Electrochemical Studies and Anode
Reaction Mechanisms of Al-Li Alloys and L2O-LiF-CaF2
Melts," Materials Science Forum, Vol.73-75, pp. 521-532, 1991. |
| 43 |
R. G. Reddy and K. Hebbar: "Phase Stability in Cu-Al/TiN composites,”
Electron Beam Melting and Refining- State of the Art 1991, ed. by R.
Bakish, pp. 284-291, 1992. |
|
44 |
R. G. Reddy: "Thermodynamics of Bacterial-Mineral Reactions", Mineral
Bioprocessing, TMS, ed. by R.W. Smith and M. Misren, pp. 453-468,
1991. |
| 45 |
K.C. Chou, W.C. Li and R.G. Reddy: "Activity and Phase diagram," J.
Ber. Bunsen-Ges. Physik, Chemie, 96 (1), pp. 68-74, 1992. |
|
46 |
S. Shrivastava and R.G. Reddy: "Viscosity of K2O-B2O3
Melts," EPD-Congress, TMS, ed. by J. P. Hager, pp. 989-1004, 1992. |
| 47 |
R. G. Reddy, B. Chen, S. Wang, G. L. Horter, and J. B. Stephenson:
"Solubility of Ni in Spent pickling Solutions," Residues and
Effluents-Processing and Environmental Consideration, ed. R.G. Reddy,
W.P. Inrie and P.B. Queneac, TMS, pp. 801-813, 1992. |
|
48 |
S. Wang, M. Misra, R. G. Reddy, and J. C. Milbouerne: "Selenium
Removal from Solutions using Iota Chips," Residues and
Effluents-Processing and Environmental Consideration, ed. R.G. Reddy,
W.P. Inrie and P.B. Queneac, TMS, pp. 757-773, 1992. |
| 49 |
S. G. Kumar, A. Narayan, and R. G. Reddy: "Thermodynamics of Li2O-LiF-CaF2
melts," Proceedings of 8th Symposium on Molten Salts, ed.
by R.J. Gale, G. Blomgren and N. Kojima, ECS, pp. 611-621, 1992. |
|
50 |
R. G. Reddy, H. Hu, and M. Blander: "Sulfide Capacities of Silicate
Slags," 4th International Conference on Molten Slags and
Fluxes, ISIJ International, pp. 144-148, 1992. |
| 51 |
R. G. Reddy, J. Y. Yen, and S. Shrivastava: "Viscosity of Na2O-B2O3
Melts," Molten Slags and Fluxes, ISIJ International, pp.
450-455, 1992. |
|
52 |
R. G. Reddy and S. G. Kumar: "Solubility and Thermodynamic Properties
of Li2O in LiF-CaF2 Melts," Metallurgical and
Materials Transactions B, Vol. 24B, pp. 1031-1035, 1993. |
| 53 |
R. G. Reddy, S. Wang, and B. Chen: "Solubility of Iron in Spent
Pickling Solutions," Minerals & Metallurgical Processing, (5),
pp. 102-107, 1993. |
|
54 |
K. C. Chou, U. B. Pal, and R. G. Reddy: "A General Model for BOP
Decarburization," ISIJ International, Vol. 33(8), pp. 862-868,
1993. |
| 55 |
R. G. Reddy and J. Y. Yen: "Solid Particles Effect on Viscosity of
Slags," The P.E. Queneau International Symposium on Extractive
Metallurgy of Copper, Nickel and Cobalt- Volume I: Fundamental
Aspects, ed. by R.G. Reddy and R.N. Weizenbich, TMS, pp. 309-324,
1993. |
|
56 |
S. G. Kumar and R. G. Reddy: "Processing of Nickel based High
Temperature Materials," The P.E. Queneau International Symposium on
Extractive Metallurgy of Copper, Nickel and Cobalt- Volume I:
Fundamental Aspects, ed. by R.G. Reddy and R.N. Weizenbich, TMS, pp.
1101-1124, 1993. |
| 57 |
R. G. Reddy and S. G. Kumar: "In-situ Electrochemical Processing of
Lightweight Alloys," Proc. 1993 NSF Design, Service and Manufacturing
Grantees and Research Conference, The University of North Carolina at
Charlotte, ASME, Michigan, pp. 269-275, 1993. |
|
58 |
S. G. Kumar and R. G. Reddy: "Effect of Vacuum and Aluminum Additions
on the Deoxidation of Low Carbon Steels," International Symposium on
Low Carbon Steels for the 90's,ed. by R. Asfahani and G.T. Ticher,
TMS, pp. 53-60, 1993. |
| 59 |
R. G. Reddy, S. Wang, and A. E. Torma: "A Preliminary Thermodynamic
Study of Bacterial Attachment on Uranium Contaminated Soils from
Fernald," International Biohydrometallurgy Symposium, ed. by A.E.
Torma, J.E. Way and V.L. Lakeshmanon, TMS, pp. 715-730, 1993. |
|
60 |
R. G. Reddy, S. Wang, and B. Chen: "Thermodynamics of Chromium
Solubility in HF -HNO3 - H2O Solutions,"
Proceedings of Milton E. Wadsworth International Symposium on
Hydrometallurgy, ed. by G.W. Warren and B.J. Hiskey, SME, pp. 269-282,
1993. |
| 61 |
S. G. Kumar, R. G. Reddy, and P. K. Rao: "Role of Electroslag
Remelting Process in the Advanced Materials Technology," Proc.
Processing Materials for Properties, ed. by H.Henein and T. Oki, TMS,
pp. 931-934, 1993. |
|
62 |
D. M. Kocherginsky and R. G. Reddy: "In-situ Formation of Silicon
Carbide in Aluminum-Silicon Melts," Control of Interfaces in Metal and
Ceramics Composites, edited by R. Y. Lin and S. G. Fishman, TMS, pp.
71-79, 1993. |
| 63 |
R. G. Reddy and S.G. Kumar: "Thermodynamics of Y2O3-LiF-YF3
Melts," Electrochemical Technology of Molten Salts, ed. by C.A. L.
Sequeira and G.S. Picard, Trans. Tech. Publ., Molten Salt Forum, Vol.
1 & 2, pp. 233-242, 1993-94. |
|
64 |
R. G. Reddy and S. G. Kumar: "Solubility and Thermodynamic Properties
of Y2O3 in LiF - YF3 Melts,"
Metallurgical and Materials Trans. B, 25B, pp. 91-96, 1994. |
| 65 |
S. G. Kumar, R. G. Reddy and H. M. Nerurkar: "Effect of Slag
Composition and Vacuum on the Deoxidation Behavior of High Carbon
Steel," EPD Congress, ed. by G. Warren, TMS, pp. 701-711, 1994. |
|
66 |
P. T. Velu and R. G. Reddy: "Thermodynamic Properties of CeO2
in Fluoride Melts," EPD Congress, ed. by G. Warren, TMS, pp.
1163-1169, 1994. |
| 67 |
R. G. Reddy: "In-situ Electrochemical Processing of Lightweight
Alloys," Proc. 1994 NSF Design, Service and Manufacturing Grantees and
Research Conference, ASME, Michigan, pp. 631-632, 1994. |
|
68 |
S. Wang and R. G. Reddy: "Experimental Determination of Vapor
Pressures of KCl," Molten Salts, ed. by C.L. Hussey, P.S. Newman, G.
Mamantov and Y. Iro, ECS, pp. 146-155, 1994. |
| 69 |
R. G. Reddy, A. R. Narayan, and P. T. Velu: "Anode Over voltage on
Graphite in Li2O-LiF-CaF2 Melts," Molten Salts,
ed. by C.L. Hussey, P.S. Newman, G. Mamantor and Y. Iro, ECS, pp.
385-391, 1994. |
|
70 |
S. Wang, R. G. Reddy, and A. E. Torma: "Biotreatment of Uranium
Contaminated Soils," Metallurgical Processes for the Early Twenty
First Century, editor H. Y. Sohn, TMS, Vol. I, pp. 583-589, 1994. |
| 71 |
D. M. Kocherginsky, R. G. Reddy, L. M. Soifer, and V. V. Mechev:
"Direct Conversion of High Grade Nickel Matte to Nickel,"
Metallurgical Processes for the Early Twenty First Century, ed. by H.Y.
Sohn, TMS, pp. 373-381, 1994. |
|
72 |
S. G. Kumar and R. G. Reddy: "Processing of Structural Materials in
Microgravity," The 6th International Symposium on
Experimental Methods for Microgravity Materials Science, ed. by R.A.
Schiffman and J.B. Andrews, TMS, pp. 175-183, 1994. |
| 73 |
R. G. Reddy and S. Brown: "Pyrolysis of Spent Potliner (SPL)," Metals
and Materials Waste Reduction, Recovery and Remediation, ed. by K.C.
Liddel, R.G. Bautista and R.J. Orith, TMS, pp. 163-170, 1994. |
|
74 |
S. G. Kumar, R. G. Reddy, and L. Brewer: "Phase Equilibria in Ti3Al-Nb
Alloys at 10000C," J. of Phase Equilibria, Vol. 15, No. 3,
pp. 279-284, 1994. |
| 75 |
M. E. Dewiche, J. E. Wey, A. E. Torma, G. E. Matthern, R. G. Reddy, D.
T. Maiers, and J. C. Cunnane: “Bioremediation of Uranium Contaminated
Fernald Soils,” Symp. On Waste Management, Laser Options, Inc. Publ.,
pp. 2093-2097, 1994. |
|
76 |
R. G. Reddy and P. T. Velu: “In-Situ Electrochemical Processing of
Light-Weight Alloys,” Proc. 1995 NSF Design and Manufacturing
Conference, ASME, Michigan, pp. 481-482, 1995. |
| 77 |
S. G. Kumar, R. G. Reddy, J. Wu and J. Holthus: "Evaluation of
Microstructure and Phase Relations in a Powder Processed Ti-44Al-12Nb
Alloy," Journal of Materials Engineering and Performance, vol. 4, pp.
63-69, 1995. |
|
78 |
S. Wang, R. G. Reddy, and A. E. Torma: “Evaluation of Uranium
Contaminated Soils,” New Remediation Technology in the Changing
Environmental Arena, ed. by B.J. Scheiner, T.D. Chatwin, H. EI-Shall,
S.K. Kawatra and A.E. Torma, SME, 22, pp. 157-162, 1995. |
| 79 |
R. G. Reddy and K. N. Hebbar: “Vitrification of Spent Potliners,” New
Remediation Technology in the Changing Environmental Arena, by B.J.
Scheiner, T.D. Chatwin, H. EI-Shall, S.K. Kawatra and A.E. Torma, SME,
24, pp. 171-175, 1995. |
|
80 |
W. Zhao and R. G. Reddy: “Sulfide Capacities of CaO-AlO1.5
Metals,” EPD Congress, ed. by G. Warren, TMS, pp. 39-47, 1995. |
| 81 |
P. T. Velu and R. G. Reddy: "Solubility of Li2CO3
in LiF-CaF2 Electrolyte by EMF Measurements", Proc. Trace
and Reactive Metals: Processing and Technology, ed. by R.G. Reddy and
B. Mishra, TMS, pp. 71-80, 1995. |
|
82 |
D. M. Kocherginsky and R. G. Reddy: "In situ Processing of Al/SiC
Composite", Proc. In Situ Reactions for Synthesis of Composites,
Ceramics, and Intermetallics, ed. by E.V. Barrera, F.D.S. Marquis, W.E.
Frazier, S.G. Fishman, N.N. Thadhan and Z.A. Munir, TMS, pp. 159-167,
1995. |
| 83 |
M. N. Ahmad and R. G. Reddy: "Recycling of Chrome Containing Materials
Herein-Before-Land-Filled", Proceedings of HAZMACON’ 95 ABAG, ed. by
T. Bursztynsky and M.L. Loss, CA, Association of Bay Area Governments,
Oakland, CA, pp. 514-525, 1995. |
|
84 |
R. G. Reddy and W. Zhao: "Sulfide Capacities of Na2O-SiO2
Melts", Metallurgical and Materials Transactions B, 26B,
pp. 925-928, 1995. |
| 85 |
S. G. Kumar and R. G. Reddy: "Effect of Processing on Oxygen Content
and Phase Relations in Lightweight Titanium Aluminides," Proc. Intl.
Symp. on Synthesis/Processing of Lightweight Metallic Materials, ed.
by F.H. Frees, C. Suriyanarayanan and C.M. Ward-Close TMS,
pp.129-139, 1995. |
|
86 |
S. G. Kumar and R. G. Reddy: "Processing of a Nb3Al-Ti
Ternary Alloy from Elemental and Prealloyed Powders," Design
fundamentals of High-Temperature Composites, Intermetallics and
Metal-Ceramic Systems, ed. by R.Y. Lin, Y.A. Chang, R.G. Reddy and C.T.
Liu, TMS, pp. 213-222, 1996. |
| 87 |
R. G. Reddy and P. T. Velu: "In-situ Electrochemical Processing of
Light-Weight Alloys: Anodic Over voltage Measurement", Proceedings of
the 1996 NSF Design and Manufacturing Guarantees and Research
Conference, The University of New Mexico and Sandia National Lab, SME,
pp. 427-428, 1996. |
|
88 |
P. T. Velu and R. G. Reddy: "Anodic Over voltage on Graphite in Li2CO3-LiF-CaF2
Melts", Light Metals, ed. by W. Hale, TMS, pp. 1139-1147, 1996. |
| 89 |
R. Singareddy and R. G. Reddy: "Evaluation of Thermodynamics of Solute
Oxygen in Ternary Liquid Alloys," Design Fundamentals of
High-Temperature Composites, Intermetallics and Metal-Ceramic Systems,
ed. by R.Y. Lin, Y.A. Chang, R.G. Reddy and C.T. Liu, TMS, pp.
323-336, 1996. |
|
90 |
Z. Cai and R. G. Reddy: "Removal of Radionuclides Using Zeolites", Light Metals, ed. by W. Hale, TMS, Warrendale, USA, pp. 1173-1180,
1996. |
| 91 |
S. C. Torma, R. G. Reddy, and A. E. Torma: "Process Technologies for
Remediation of Lead Contaminated Soil", ed. by S.C. Torma, R. G. Reddy
and A. E. Terma, SME, 96-47, pp. 7, 1996. |
|
92 |
R. G. Reddy, J. Y. Yen, and Z. Zhang: "Chemical Properties of Sodium
Borate Coating", Proc. High Temperature Coatings, ed. by N.B. Dahatre,
TMS, pp. 31-46, 1996. |
| 93 |
R. G. Reddy and S. R. Reddy: "Thermodynamic Modeling of Molten Metal
Systems", Emerging Separation Technologies for metals, Engineering
Foundation Conference, ed. by R.G. Bautista, TMS, pp.17-34, 1996. |
|
94 |
S. G. Kumar and R. G. Reddy: "Microstructure and Phase Relations in a
Powder Processed Ti-22Al-12Nb Alloy", Metallurgical and Materials
Transactions A, 27A, pp. 1121-1126, 1996. |
| 95 |
X. Wen and R.G. Reddy: "Oxidation Behavior of Ti3Al",
Processing and Fabrication of Advanced Materials V, ed. by T.S.
Srivatsan and J.J. Moore, TMS, pp. 37-389, 1996. |
|
96 |
S. Wang and R. G. Reddy: "Low Melting Fluxes for Recycling of Al
Scrap", Second International Symposium on Extraction and processing
for the Treatment and Minimization of Wastes, ed. by V. Ramachandran
and C.C. Nesbitt, TMS, pp. 37-389, 1996. |
| 97 |
J. U. Ejiofor and R. G. Reddy: "Microstructural and Tribological
Property Evaluation of Char Reinforced Al-Si Alloy Composites", Automotive Alloys, ed. by S. K. Das, TMS, pp. 95-112, 1997. |
|
98 |
R. G. Reddy and X. Wen: "Oxidation Behavior of Al3Ti
Intermetallics", EPD Congress, ed. by B. Mashra, TMS, pp. 47-54, 1997. |
| 99 |
R. G. Reddy, J. Y. Yen, and Z. Zhang: "Viscosity of Na2O-SiO2-B2O3
Melt", 5th International Conference on Molten Slags,
Fluxes and Salts ’97, ed. by G.R. Belton, S. Jahanshahi, TMS, pp.
203-213, 1997. |
|
100 |
P. T. Velu and R. G. Reddy: "Sensor for EMF Measurements in Molten
Salt Electrolysis", ed. by S. Viswanathan, R.G. Reddy and J.C. Malas,
TMS, pp. 361-371, 1997. |
| 101 |
S. Wang and R. G. Reddy: “Vapor Pressure Studies of the Salt Fluxes,”
Light Metals 1997, ed. by R. Huglen, TMS, pp. 207-210, 1997. |
|
102 |
R. G. Reddy and P. T. Velu: "In-situ Electrochemical Processing of
Lightweight Alloys", Proceedings of the 1997 NSF Design, Service and
Manufacturing Grantees and Research Conference, University of
Washington, Seattle, Washington, ASME, pp. 271-272, 1997. |
| 103 |
J. U. Ejiofor, B. A. Okorie, and R. G. Reddy: “Powder Processing and
Properties Evaluation of Zircon Reinforced Al-13.5Si-2.5Mg Alloy
Composites", Journal of Materials Engineering and Performance, Vol.
6(3), pp. 326-334, 1997. |
|
104 |
R. G. Reddy, X. Wen, and Y. Li: "Oxidation of Ti3Al and Ti3Al-Nb
Intermetallics", Titanium Extraction and Processing, ed. by B. Mishra
and G. J. Kipouros, TMS, pp. 153-161, 1997. |
| 105 |
J. U. Ejiofor and R. G. Reddy: "Developments in the Processing and
Properties of Particulate Al-Si Alloy Composites", Journal of Metals (JOM),
Vol. 49, pp. 31-37, 1997. |
|
106 |
J. U. Ejiofor and R. G. Reddy: "Effects of Porous Carbon on Sintered
Al-Si-Mg Matrix Composites", Journal of Materials Engineering and
Performance, Vol. 6(6), pp. 785-791, 1997. |
| 107 |
R. G. Reddy and M. V. Klein: "Kinetics of Chromite Reduction with
Carbon", Proceedings of The Julian Szekely Memorial Symposium on
Materials Processing, ed. by H.Y. Sohn, J.W. Evans and D. Apelian,
TMS, pp. 271-284, 1997. |
|
108 |
A. E. Torma and R. G. Reddy: “Microbial Extraction of Cadmium from
Sulfide Mineral Resources,” Metall., 7/8, vol. 51, pp. 390-392, 1997. |
| 109 |
J. U. Ejiofor B. A. Okorie, and R. G. Reddy: “Synthesis and Properties
Analysis of Char-reinforced Al-13.5Si-2.5Mg Alloy Composites,” Journal
of Materials Science, 33, pp. 1003-1013, 1998. |
|
110 |
R. S. Chiou, P. T. Velu, and R. G. Reddy: "Thermodynamic Modeling of Calciothermic Reduction of NdCl3",
Light Metals, ed. by B.
Welch, TMS, pp. 1327-1331, 1998. |
| 111 |
K. G. Cook, J. U. Ejiofor, and R. G. Reddy: "Centrifugal Casting of
Aluminum Alloy Tubular Components", The International Symposium on
Cast Shop Technology, Light Metals, ed. by B. Welch, TMS, pp.
1191-1196, 1998. |
|
112 |
Z. Zhang and R. G. Reddy: "Viscosity of Na2O-SiO2-B2O3
Ternary Melts", EPD Congress’98, ed. by B. Mishra, TMS, pp. 957-970,
1998. |
| 113 |
R. G. Reddy and R. B. Inturi, and M. V. Klein: “Low Temperature
Reduction of Chromite Ores with Carbon,” EPD Congress ’98, ed. by B.
Mishra, TMS, pp. 697-715, 1998. |
|
114 |
X. Wen and R. G. Reddy: "Oxidation Behavior of TiAl3", EPD
Congress’98, ed. by B. Mishra, TMS, pp. 903-924, 1998. |
| 115 |
R. G. Reddy and R. B. Inturi: "Reduction of Roast Movat Chromite Ore
with Carbon", SME, paper #.98-50, 1998. |
|
116 |
R. G. Reddy: "A Novel Manufacturing Process for Lightweight Alloy
Composites", Proceedings of The 1998 NSF Design, Service and
Manufacturing Grantees and Research Conference, NSF, Arlington, VA,
pp. 549-550, 1998. |
| 117 |
R. G. Reddy and R. K. Mishra: "Characterization of Polishing Dust for
Gold Recovery", The Santa Te Symposium on JMT, ed. D. Schneller,
Albuquerque, New Mexico, pp. 217-236,1998. |
|
118 |
J. U. Ejiofer, G. F. Fernando, and R. G. Reddy: "Radiographic
Inspection of Reaction-Sintered Discontinuously Reinforced Al-Si Alloy
Composites", Journal of Materials Science, 33, pp. 4029-4033, 1998. |
| 119 |
R. G. Reddy: "A Novel Manufacturing Process for Lightweight Alloy
Composites", Composites in Manufacturing, Vol. 14 (3), pp. 5-7, 1998. |
|
120 |
J. U. Ejiofor and R. G. Reddy: "Interfaces and properties of Al-Si Alloy
Zircon Particulate Composites", Journal of Materials Research, vol. 13
(11), pp. 3093-3099, 1998. |
| 121 |
Z. Zhang and R. G. Reddy: "Viscosity Measurement and Modeling
of Borate and Borosilicate Melts", Fluid Flow Phenomena in Metals
Processing, ed. by N. El-Kaddah, D.G.C. Robertson, S.T. Johansen and
V.R. Voller, TMS, pp. 253-260, 1999. |
|
122 |
Z. Zhang, R. G. Reddy, and S. Viswanathan: "Viscosity
Measurement of Aluminum Alloy Containing SiC Particulates", Fluid Flow
Phenomena in Metals Processing, ed. by N. El-Kaddah, D.G.C. Robertson,
S.T. Johansen and V.R. Voller, TMS, pp. 543-550, 1999. |
| 123 |
S. W. White and R. G. Reddy: "Waste Processing of MgO Bag house Dust
Using Plasma Arc Technology", EPD Congress, ed. by B. Mishra, TMS, pp.
687-697, 1999. |
|
124 |
K. G. Cook and R. G. Reddy: "Influence of Mold Coating Properties on
Aluminum Alloy Centrifugal Castings", Light Metals, ed. by C.E. Eckert,
TMS, pp. 959-966, 1999. |
| 125 |
M. K. Mohan and R. G. Reddy: "Recovery of Lead from Process
Solutions", EPD Congress, ed. by B. Mishra, TMS, pp. 905-918, 1999. |
|
126 |
M. K. Mohan and R. G. Reddy: "Recovery of Antimony from Process
Solutions", EPD Congress, ed. by B. Mishra, TMS, pp. 965-978, 1999. |
| 127 |
M. K. Mohan and R. G. Reddy: "Processing of Radionuclide Waste",
Recent Res. Devel. Metallurg. & Materials Sci., vol. 3, pp. 49-69,
1999. |
|
128 |
R. G. Reddy and R. B. Inturi: "Reduction of Roast Movat Chromite Ore
with Carbon", Minerals & Metallurgical Processing Journal, Vol. 16
(20), pp. 46-50, 1999. |
| 129 |
R. G. Reddy and S. Shrivastava: “Utilization of Spent Potliners as a
Fluidizer”, SME, paper # 99-111, 1999. |
|
130 |
J. U. Ejiofor and R. G. Reddy: "Characterization of Pressure-assisted
Sintered Al-Si Composites", Materials Science and Engineering, A259,
pp. 314-323, 1999. |
| 131 |
S. R. Reddy and R. G. Reddy: "Thermodynamic Properties of Quaternary
Systems", Metal Separation Technologies Beyond 2000: Integrating Novel
Chemistry with Processing, United Engineering Foundation Conference
Proceedings, ed. by K.C. Liddel and D.J. Chaiko, TMS, pp. 243-253,
1999. |
|
132 |
M. K. Mohan and R. G. Reddy: Treatment of Wastes Containing
Radionuclides, REWAS’99 Global Symposium on Recycling, Waste Treatment
and clean technology, ed. by I. Gaballah, J. Hager and R. Solozabal,
Spain, Vol I, pp. 857-868, 1999. |
| 133 |
X. Wen and R. G. Reddy, "Oxidation of TiAl Intermetallics", Long Term
Stability of High Temperature Materials, Ed. G. E. Fuchs, K. A. Dannemann and T. C. Deragon, TMS, pp. 201-217, 1999. |
|
134 |
R. G. Reddy: "Impurity Removal from Copper Smelter Slags", Impurities
2000, ed. by C. Young, SME, pp. 239-249, 2000. |
| 135 |
S, Niyomwas, B. Wu, and R. G. Reddy, "Modeling of Materials
Synthesis in Thermal Plasma Reactor", Materials Processing in the
Computer Age III, ed. by V. R. Voller et al, TMS, pp. 199-210,
2000. |
|
136 |
S. W. White, R. G. Reddy, and B. Wu, "Plasma Processing of Waste
MgO Dust," Light Metal 2000, ed. by R. D. Peterson, TMS, pp.
871-883, 2000. |
| 137 |
B. Wu and R. G. Reddy, "A Novel Manufacturing Process for Aluminum
Alloy Composites", Proceeding of 2000 NSF Design and Manufacturing
Grantees Conference, ASME, paper # 339, 2000. |
|
138 |
S. McElroy, D. Yang, and R. G. Reddy, "Laser Surface Modification of
TiAl Intermetallics", Surface Engineering: In Materials Science I, ed.
by S. Seal, N. B. Dahotre, J. J. Moore, and B. Mishra, TMS, pp. 89-99,
2000. |
| 139 |
S. Niyomwas,
B. Wu, and R. G. Reddy, "Synthesis and Modeling of Fe-TiN Composites by
Thermal Plasma Processing", Ultrafine Grained Materials, ed. by C.
Suryanarayana, N. N. Thadhani, and T. C. Lowe, TMS, pp. 89-98, 2000. |
|
140 |
S. McElroy, D. Yang, and R. G. Reddy, "Laser Processing of Titanium
Aluminides", Journal of Materials Engineering and Performance (JMEPEG),
Vol. 9 (5), pp 506- 515, 2000. |
| 141 |
R. G. Reddy and Z. Zhang, "Viscosity Measurements of Lead Slags", Recycling of Metals and Engineered Materials, ed. by D. L.
Stewart, Jr., J. C. Daley and R. L. Stephens, TMS, pp. 153-163, 2000. |
|
142 |
Q. Zheng, R. G. Reddy, and B. Wu, "In-Situ Processing of AlN – Al
alloy Composites” State of the Art in Cast MMC’s, ed. by P. K. Rohatgi,
TMS, pp 1-12, 2000. |
| 143 |
B. Wu, R. G. Reddy, and R. D. Rogers, "The 4th
International Symposium on Aluminum Recycling via Room Temperature
Electrolysis in Ionic Liquids," Recycling of Metals and Engineered
Materials, ed. by D. L. Stewart, Jr., J. C. Daley and R. L. Stephens,
TMS, pp. 845-856, 2000. |
|
144 |
M. K. Mohan and R. G. Reddy, "Processing of waste solutions
Containing Heavy Metals", Proceedings of the International Conference
on Environmental Management in Metallurgical Industries (EMMI-2000),
ed. by R.C. Gupta, S.N. Ojha, J.P. Pathak, and Sunil Mohan, Banaras
Hindu University, Varanasi, India, pp. 225-232, 2000. |
| 145 |
A. Pelton and R. G. Reddy, Foreword, The Milton Blander Symposium on
Thermodynamic Predictions and Applications, Metallurgical and
Materials Transactions B, Vol. 31B, pp. 577-578, 2000. |
|
146 |
R. G. Reddy, Editorial, Journal of Phase Equilibria, Vol.21, No. 3,
pp. 218, 2000. |
| 147 |
R. G. Reddy, X, Wen and C. I. Okafor, "Diffusion of oxygen in Al2O3
oxidation product of TiAl3", Metallurgical and Materials
Transactions A, Vol. 31A, pp. 3023-3028, 2000. |
|
148 |
R. G. Reddy and S. Shrivastava, "Viscosity of Spent Potliner Mixed
with Additives", Minerals & Metallurgical Processing, Vol. 18 (2), pp.
95-100, 2001. |
| 149 |
R. G. Reddy, A. M. Yahya and L. Brewer, "Thermodynamic Properties of
Ti-Al Intermetallics", Journal of Alloys and Compounds, Vol. 321, pp.
223-227, 2001. |
|
150 |
R. G. Reddy and Q. Zheng, "A Novel Manufacturing Process for Aluminum
Alloy Composite", Proceeding of 2001 NSF Design and Manufacturing
Grantees Conference, ASME, (CD), paper
MPM-59, 2001. |
| 151 |
Z. Zhang and R. G. Reddy, "Distribution of Various Structural Species
in Alakali Borate Melts", EPD Congress 2001, ed. by P. R. Taylor, TMS,
pp. 353-367, 2001. |
|
152 |
R. G. Reddy and K. Hebbar, "Viscosity of FeO-SiO2 Slags",
Minerals & Metallurgical Processing, Vol. 18(4), pp. 195-199, 2001. |
|
153 |
B. Wu, R. G. Reddy and R. D. Rogers, "Novel Ionic Liquid Thermal
Storage for Solar Thermal Electric Power Systems", Forum 2001, Solar
Energy: The Power to Choose, ed. by R. Cambell-Howe, ASES, (CD), 7pp,
2001. |
|
154 |
R. G. Reddy, X. Wen and I. C. Okafor, "Interdiffusion of Oxygen in TiO2
oxidation Products of Ti3Al", Metallurgical and
Materials Transactions A, Vol. 32A, pp. 491-495, 2001. |
|
155 |
Z. Zhang, R. G. Reddy, and S. Viswanathan, "Viscosities
of Semisolid Aluminum Alloys and Composites", Proceedings of M. C.
Flemings Symposium on Solidification and Materials Processing, ed. by
R. Abbaschian, H. Brody and A. Mortensen , TMS, pp. 267 – 271, 2001. |
|
156 |
R. G. Reddy, "The Pyro- and Hydrometallurgical Processing of
Uranium-containing Waste", Journal of Metals (JOM), Vol. 53,
pp. 21-24, 2001. |
|
157 |
B. Wu, R. G. Reddy and R. D. Rogers, "Aluminum reduction via Near Room
Temperature Electrolysis in Ionic Liquids", Light Metals 2001, ed. by
J. L. Anjier, TMS, pp. 237-243, 2001. |
|
158 |
Q. Zheng and R. G. Reddy, "In Situ Processing of Al-alloy Matrix
Composites", Affordable Metal-Matrix Composites for High Performance
Applications, ed. by A. B. Pandey, K. L. Kendig and T. J. Watson, TMS,
pp. 199-210, 2001. |
|
159 |
R. G. Reddy, X. Wen and M. Divakar, "Isothermal Oxidation Studies on TiAl", Metallurgical and Materials Transactions A, Vol. 32A,
pp. 2357-2361, 2001. |
|
160 |
S. K. Kim and
R. G. Reddy, "Recent Advances in Electrodeposition Technology", Journal
of the Korean Institute of Surface Engineering, Vol. 34, No. 6, pp.
553-567, 2001. |
|
161 |
R. G. Reddy
and Y. Li, "Isothermal Oxidation of a Ternary TiAl-Nb Alloy", High
Temperature Materials and Processes, Vol. 20, No. 5-6, pp. 319-331,
2001. |
|
162 |
Q. Zheng, B. Wu, and R. G.
Reddy, "In-situ Formation of AlN Reinforced Al Alloy Composites
Using Ammonia", Lightweight
Alloys for Aerospace Application,
eds. K. Jata, E. W. Lee, W. Frazier, and N. J. Kim, TMS,
Warrendale, PA, USA, pp. 295-307,
2001 |
|
163 |
R. N. Reddy
and R. G. Reddy, "Manganese Oxide Composites As Electrode Materials
for Electrochemical Capacitors", Fundamentals of Advanced Materials
for Energy Conversion, ed. by D. Chandra and R. G. Bautista, TMS, pp.
75-81, 2002. |
|
164 |
A. Kumar and
R.G. Reddy, "PEM Fuel Cell Bipolar Plate – Materials Selection, Design
and Integration", Fundamentals of Advanced Materials for Energy
Conversion, ed. by D. Chandra and R. G. Bautista, TMS, pp. 41-53,
2002. |
|
165 |
Z. Zhang, M.
Arenas and R. G. Reddy, "Fluidity of Slags from Waste Incinerators", EPD Congress, ed. by P. R. Taylor, TMS, pp. 801-809, 2002. |
|
166 |
Z. Zhang and
R. G. Reddy, "Thermal Stability of Ionic Liquids", Fundamentals of
Advanced Materials for Energy Conversion, ed. by D. Chandra and R. G.
Bautista, TMS, pp. 33-39, 2002. |
|
167 |
Z. Zhang and R. G. Reddy,
"Viscosity of Lead Silicate Slags", Minerals & Metallurgical
Processing, Vol 19, No. 1, pp. 37-42, 2002. |
|
168 |
V. Kamavaram
and R. G. Reddy, "Electrochemical Studies of Aluminum Deposition in
Ionic Liquids at ambient Temperatures", Light Metals, ed. by W.
Schneider, TMS, pp. 253-258, 2002. |
|
169 |
Q. Zheng and R. G. Reddy, "In-Situ
processing of Al Alloy Matrix Composites Using Gas- bubbling Method",
Proceeding of the 2002 NSF Design, Service and Manufacturing Grantees
and Research Conference, Iowa State University, Ames, Iowa, USA, pp.
2144-2146, 2002. |
|
170 |
R. G. Reddy, "In
Situ formation of Multi-layer formation in the Oxidation of Ti3Al-Nb",
Journal of Metals (JOM), Vol. 54 (2), pp. 65-67, 2002. |
|
171 |
V. Kamavaram and R. G. Reddy, "Recycling of Al-MMC in
Ionic Liquids at Near Room Temperature", ICCE/9, Proceedings of
International Conference on Composites Engineering, ed. by David Hui,
University of New Orleans, USA, pp. 359-360, 2002. |
|
172 |
B. Wu and R.
G. Reddy, "In-situ formation of SiC Reinforced Al-Si alloy Composites
using Methane Gas Mixtures", Metallurgical and Materials
Transactions B, Vol. 33B, pp. 543-550, 2002. |
|
173 |
R. G. Reddy and J. M. Font,
"Arsenic Capacities of FeO-CaO-MgO-SiO2 Slags", Mills
Symposium- Metals, Slags, Glasses: High Temperature Properties &
Phenomena, Proceedings, ed. by R. E. Aune and S. Sridhar, NPL
Publication, Middlesex, UK, Vol. 2, pp. 451-464, 2002. |
|
174 |
B. Derin and
R. G. Reddy, "Modeling of Sulfide Capacities of FeO based Ternary
Silicate Melts", International Metallurgy and Materials Congress,
UCET, Istanbul, Turkey, pp. 54-62, 2002. |
|
175 |
V. Kamavaram
and R. G. Reddy, "Recycling of Aluminum Based Materials in Ionic
Liquids", Recycling and Waste Treatment in Mineral and Metal
Processing: Technical and Economic Aspects Proceedings, ed. by B.
Bjorkman, C. Samuelsson, and J. O. Wikstrom, TMS, MEFOS, Luleå,
Sweden; Vol. 2, pp. 517-526, 2002. |
|
176 |
R. G. Reddy, Y. Li and M. F.
Arenas, "Oxidation of Ternary Ti3Al-Ta Alloys", High
Temperature Materials and Processes, vol. 21, No. 4, pp. 195-205,
2002. |
|
177 |
V. Kamavaram and R. G. Reddy,
"Electrorefining of Aluminum in HMIC-AlCl3 Ionic Liquids at
Near Room Temperature", Molten Salts XIII 2002, ed. by H. C. Delong,
R. W. Bradshaw, M. Matsunaga, G. R. Stafford, and P. C. Trulove, ECS,
pp. 840-846, 2002. |
|
178 |
R. N. Reddy
and R. G. Reddy, "MnO2 as electrode materials for
electrochemical capacitors", Electrochemical Capacitors and Hybrid
Power Sources, ed. by R. J. Brodd, D. H. Doughty, K. Naoi, M. Morita,
C. Nanjundiah, J. H. Kim and Nagasubramanian, ECS, pp. 197-204, 2002.
|
|
179 |
R. G. Reddy, V. L. Prabhu, and D.
Mantha, "Zinc Fuming from Lead Blast Furnace Slag", High Temperature
Materials and Processes, Vol. 21, No.6, pp. 377-386, 2002. |
|
180 |
A. Kumar and R. G. Reddy, "Effect
of channel dimensions and shape in the flow-field distributor on the
performance of polymer electrolyte membrane fuel cells", Journal of
Power Sources, Vol. 113, No.1, pp. 11-18, 2003. |
|
181 |
R. N.
Reddy and R. G. Reddy, "Sol-gel Prepared MnO2 as
Electrode Material for Electrochemical Capacitors",
2003 NSF Des | |