SCHOLARLY PUBLICATIONS

In Peer Reviewed Journals: (44 in print or press; 31 at UA)

 

  1. M.L. Weaver and M.J. Kaufman, "An Investigation of Al2Ta and Related Phases in the Ternary Al-Ti-Ta System," Scripta Metallurgica et Materialia, v.26, pages 411-416 (1992).

  2. M.L. Weaver, M.J. Kaufman and R.D. Noebe, "The Effects of Alloy Purity on the Mechanical Behavior of Soft Oriented NiAl Single Crystals," Scripta Metallurgica et Materialia, v.29, pages 1113-1118 (1993).

  3. M.L. Weaver and M.J. Kaufman, "Application of a Method for Determination of the Internal Stress in Polycrystalline NiAl," Scripta Metallurgica et Materialia, v.31, pages 745-750 (1994).

  4. M.L. Weaver, R.D. Noebe, J.J. Lewandowski, B.F. Oliver and M.J. Kaufman, "The Effects of Interstitial Content, Heat Treatment, and Prestrain on the Tensile Properties of NiAl," Materials Science and Engineering, v.A192/193, pages 179-185 (1995).

  5. M.L. Weaver and M.J. Kaufman, "Phase Relationships and Transformations in the Ternary Aluminum-Titanium-Tantalum System," Acta Metallurgica et Materialia, v.43, no.7, pages 2625-2640 (1995).

  6. M.L. Weaver, M.J. Kaufman and R.D. Noebe, "Kinetics of Static Strain Aging in Polycrystalline NiAl-Based Alloys," Intermetallics, v.4, no. 2, pages 121-129 (1996).

  7. M.L. Weaver, R.D. Noebe and M.J. Kaufman, “The Influence of C and Si on the Flow Behavior of NiAl Single Crystals,” Scripta Materialia, v. 34, no. 6, pages 941-948 (1996).

  8. M.L. Weaver, R.D. Noebe, J.J. Lewandowski, B.F. Oliver, and M.J. Kaufman, “Observations of Static Strain Aging in Polycrystalline NiAl,” Intermetallics, v. 4, no. 7, pages 533-542 (1996).

  9. M.L. Weaver, R.D. Noebe, and M.J. Kaufman, “Observations of Dynamic Strain Aging in Polycrystalline NiAl,” Intermetallics, v. 4, no. 8, pages 593-600 (1996).

  10. M.L. Weaver, M.J. Kaufman, A.J. Duncan, and R.D. Noebe, “Manifestations of Dynamic Strain Aging in Soft-Oriented NiAl Single Crystals,” Metallurgical and Materials Transactions A, v. 27A, no. 11, pages 3542-3557 (1996).

  11. X.D. Zhang, S. Godfrey, M. Weaver, M. Strangwood, P. Threadgill, M.J. Kaufman, and M.H. Loretto, “The Massive Transformation in Intermediate Ti-Al Alloys: Mechanistic Observations,” Acta Metallurgica et Materialia, v. 44, no. 9, pages 3723-3734 (1996).

  12. M.L. Weaver and H. Garmestani, “Microstructures and Mechanical Properties of Commercial Titanium Foils Processed via the Melt Overflow Process,” Materials Science and Engineering A, v. A247, pages 229-238 (1998).

  13. M.L. Weaver, L.P.M. Brandao, E. S. Gillman, K. H. Dahmen, A. Morrone, and H. Garmestani, “Microcharacterization of Liquid Delivery Metalorganic Chemical Vapor Deposition Processed Thin Film Materials Exhibiting Giant Magnetoresistance,” Journal of Materials Research, v. 14, n. 5, pages 2007-2011 (1999).

  14. C. Ruby, R. Ott, F. Huang, M.L. Weaver and J.A. Barnard, “XPS Study of Reactively Sputtered Ti-B-N Hard Coatings,” Surface and Interface Analysis, v. 29, n. 12, pages 823-828 (2000).

  15. R.D. Ott, C. Ruby, F. Huang, M.L. Weaver, and J.A. Barnard, “Nanotribology and Surface Chemistry of Reactively Sputtered Ti-B-N Hard Coatings,” Thin Solid Films, v. 377-378, n.1-2, pages 602-606 (2000).

  16. C.L. Hale, W.S. Rollings and M.L. Weaver, “Activation Energy Calculations for Discontinuous Yielding in Inconel 718spf,” Materials Science and Engineering A, v. A300, n. 1-2, pages 153-164 (2001).

  17. F. Huang, J.A. Barnard, and M.L. Weaver, “Ultrathin TiB2 Protective Films,” Journal of Materials Research v. 16, n. 4, pages 945-954 (2001).

  18. F. Huang, G. Wei, J.A. Barnard, and M.L. Weaver, “Microstructure and Stress Development in Magnetron Sputtered TiAlCr(N) Films,” Surface and Coatings Technology, v. 146-147, pages 391-397 (2001).

  19. G. Wei, T.W. Scharf, J.N. Zhou, F. Huang, M.L. Weaver, and J.A. Barnard, “Nanotribology Studies of Cr, Cr2N and CrN Thin Films Using Constant and Ramped Load Nanoscratch Techniques,” Surface and Coatings Technology, v. 146-147, pages 357-362 (2001).

  20. F. Huang, W. J. Liu, J.F. Sullivan, J.A. Barnard, and M.L. Weaver, “Room Temperature Oxidation Resistance of Ultrathin TiB2 Films:  A New Perspective on its Potential as Protective Overcoats in Magnetic Recording,” Journal of Materials Research, v. 17, n. 4, pages 805-813 (2002).

  21. M.L. Weaver, C.W. Calhoun and H. Garmestani, “Microstructure, Texture, and Mechanical Properties of Continuously Cast Gamma TiAl,” Journal of Materials Science, v. 37, n. 12, pages 2483-2490 (2002).

  22. F. Huang, J.A. Barnard, and M.L. Weaver, “Mechanical Characterization of DC Magnetron Sputtered Amorphous Ti-Al-Cr Coatings,” Surface and Coatings Technology, v. 155, n. 2-3, pages 146-151 (2002).

  23. X. Liu, F. Huang, G. Zangari, M. Weaver, “Mechanical Properties of Soft Electrodeposited Fe-Co-Ni Films for Magnetic Recording Heads,” IEEE Transactions on Magnetics, v. 38, n. 5, pages 2231-2233 (2002).

  24. G. Wei, M.L. Weaver and J.A. Barnard, “Nanotribological Studies of Chromium Thin Films,” Tribology Letters, v. 13, n. 4, pages 255-261 (2002).

  25. B. Ning, M.E. Stevenson, M.L. Weaver and R.C. Bradt, “Apparent Indentation Size Effect in a CVD Coated Ni-Base Superalloy,” Surface and Coatings Technology, v. 163-164, n. 1, pages 112-117 (2003).

  26. M.L. Weaver, M.E. Stevenson and R.C. Bradt, “Knoop Microhardness Anisotropy and the Indentation Size Effect on the (100) of Single Crystal NiAl,” Materials Science and Engineering A, v. 345, n. 1-2, pages 113-117 (2003).

  27. G. Wei, J. Gong, G. Zangari, M.L. Weaver, and J.A. Barnard, “Thin CNx Overcoats Deposited Using Various Sputtering Gases,” Journal of Applied Physics, v. 93, n. 15, pages 8710-8712 (2003).

  28. M. P. Brady, I.M. Anderson, M.L. Weaver, H.M. Meyer, L.R. Walker, M.K. Miller, D.J. Larson, I.G. Wright , V.K. Sikka, A. Rar, G.M. Pharr, J.R. Keiser, and C.A. Walls, “Nitrogen Impurity Gettering in Oxide Dispersion Ductilized Chromium,” Materials Science and Engineering A, v. 358, n. 1-2, pages 243-254 (2003).

  29. X. Li, M. Curry, G. Wei, J. Zhang, J.A. Barnard, S.C. Street, and M.L. Weaver, “Nanotribological Studies of Dendrimer-Mediated Metallic Thin Films,” Surface and Coatings Technology, v. 177-178, pages 504-511 (2004).

  30. B. Ning and M.L. Weaver, “A Preliminary Study of DC Magnetron Sputtered NiAl-Hf Coatings,” Surface and Coatings Technology, v. 177-178, pages 113-120 (2004).

  31. B. Ning, M. Shamsuzzoha, and M.L. Weaver, “Microstructures and Properties of DC Magnetron Sputtered NiAl-Hf Coatings,” Surface and Coatings Technology, v. 179, n. 2-3, pages 201-209 (2004).

  32. X. Li, F. Huang, M. Curry, S.C. Street, and M. L. Weaver, “Improved Adhesion of Au Thin Films to SiOx/Si Substrates by Dendrimer Mediation,” Thin Solid Films, v. 473, n. 1, pages 164-168 (2005).

  33. B. Ning, M. Shamsuzzoha, and M.L. Weaver, “Influence of Processing Variables on the Properties of DC Magnetron Sputtered NiAl Coatings Containing Hf Additions,” Journal of Vacuum Science and Technology A, v. 23, n. 1, pages 44-54 (2005).

  34. J.F. Sullivan, F. Huang, J.A. Barnard, and M.L. Weaver, “Effect of Nitrogen Pressure on the Hardness and Chemical States of TiAlCrN Coatings,” Journal of Vacuum Science and Technology, v. 23, n. 1, pages 78-84 (2005).

  35. M.P. Brady, B.L. Armstrong, H.T. Lin, M.J. Lance, K.L. More, L.R. Walker, F. Huang, and M.L. Weaver, “Feasibility Assessment of Self-Grading Metallic Bond Coat Alloys for EBCs/TBCs to Protect Si-Based Ceramics,” Scripta Materialia, v. 52, n. 5, pages 393-397 (2005).

  36. J. Shi, F. Huang, M.L. Weaver, and T.M. Klein, “Effect of O2 Flow Ratio on the Microstructure and Stress of Room Temperature Reactively Sputtered RuOx Thin Films,” Journal of Vacuum Science and Technology, v. 23, n. 3, pages 452-459 (2005).

  37. Xiao Li, Feng Huang, M. Curry, S.C. Street, and M.L. Weaver, “Nanoscratch Behavior of Dendrimer-Mediated Ti Thin Films,” Tribology Letters, v. 19, n. 4, pages 273-280 (2005).

  38. F. Huang and M.L. Weaver, “Biaxial Modulus of Fiber-Textured Cubic Polycrystalline Films with an Arbitrary Texture Axis <hkl>,” Journal of Applied Physics, v. 98, n. 7, paper 073505 [6 pages] (2005).

  39. M.P. Brady, P.F. Tortorelli, K.L. More, E.A. Payzant, B.L. Armstrong, H.T. Lin, M.J. Lance, F. Huang, and M.L. Weaver, “Coating and Near-Surface Modification Design Strategies for Protective and Functional Surfaces,” Werkstoffe und Korrosion (Materials and Corrosion), v. 56, n. 11, pages 748-755 (2005).

  40. B. Ning, M. Shamsuzzoha, and M.L. Weaver, “Microstructure and Property Analysis of DC Magnetron Sputtered NiAl-0.6Hf Coatings,” Surface and Coatings Technology, v. 200, n. 5-6, pages 1270-1275 (2005).

  41. A.W. Warren, Y. B. Guo, M. L. Weaver, “The Influence of Machining Induced Residual Stress and Phase Transformation on The Measurement of Subsurface Mechanical Behavior Using Nanoindentation,” Surface and Coatings Technology, v. 200, n. 11, pages 3459-3467 (2006).

  42. F. Huang and M.L. Weaver, “Effective Biaxial Modulus of (hkl)-Fiber-Textured Hexagonal, Tetragonal, and Orthorhombic Films,” Journal of Applied Physics, v. 100, n. 9, paper 093523 [8 pages] (2006).

  43. M. Curry, X. Li, J. Zhang, M.L. Weaver, and S.C. Street, “Morphological and Structural Characterizations of Dendrimer-mediated Metallic Ti and Al Thin Film Nanocomposites,” Thin Solids Films, v. 515, n. 7-8, pages 3567-3573 (2007).

  44. M. Curry, X. Li, F. Huang, M.L. Weaver, and S.C. Street, “A Tribological Study of Kinetically Influenced Ultrathin Au and Cu Metal Overlayers Grown on Dendrimer Mediated Si,” Tribology Letters, v. 25, n. 2, pages 133-140 (2007).

In Peer Reviewed Conference Proceedings and/or Reports: (20 in print; 16 at UA)

 

  1. M.L. Weaver, S.L. Guy, R.K. Stone and M.J. Kaufman, "An Investigation of Phase Equilibria in the Ternary Al-Ti-Ta System," in High Temperature Ordered Intermetallic Alloys IV, Materials Research Society Symposium Proceedings, v. 213, pages 163-168, Materials Research Society, Pittsburgh, PA (1991).

  2. M.L. Weaver, “Investigation of Strain Aging in the Ordered Intermetallic Compound b-NiAl,” NASA Contractor Report 198364, July (1995).

  3. M.L. Weaver, V. Levit, M.J. Kaufman and R.D. Noebe, "The Effects of Interstitial Content and Annealing on the Flow and Fracture Behavior of Polycrystalline b-NiAl," in High Temperature Ordered Intermetallic Alloys VI, Materials Research Society Symposium Proceedings, v. 364, pages 425-430, Materials Research Society, Pittsburgh, PA (1995).

  4. M.L. Weaver, H. Garmestani and G. Das, “Texture Studies of Gamma Titanium Aluminide Sheets Produced By Melt Overflow Rapid Solidification,” in High Temperature Ordered Intermetallic Alloys VII, Materials Research Society Symposium Proceedings, v. 460, pages 243-248, Materials Research Society, Pittsburgh, PA (1997).

  5. M.L. Weaver, R.D. Noebe, and M.J. Kaufman, “Strain Aging Behavior in NiAl Microalloyed with Interstitial and Substitutional Solutes,” in High Temperature Ordered Intermetallic Alloys VII, Materials Research Society Symposium Proceedings, v. 460, pages 499-504, Materials Research Society, Pittsburgh, PA (1997).

  6. M.L. Weaver and H. Garmestani, “Microstructural and Mechanical Properties Evaluations of Titanium Foils Processed via the Melt Overflow Process,” in NASA ACE Center Series: Proceedings of the NASA University Research Center Technical Conference on Education, Aeronautics, Space, Autonomy, Earth and Environment (URC_TC’97), ACE Center Press, Albuquerque, NM, vol. 1, pages 925-929 (1997).

  7. M.L. Weaver, J. Hu and R.D. Noebe, “Static and Dynamic Strain Aging in Microalloyed NiAl-Based Alloys,” in Proceedings of the Second International Symposium on Interstitial and Substitutional Solute Effects in Intermetallics, The Minerals, Metals and Materials Society, pages 131-147 (1998).

  8. M.L. Weaver, M.E. Stevenson, M. Shamsuzzoha, R.D. Ott and M.P. Brady, “Elastic and Plastic Properties of Gamma + Laves Phase In-Situ Composite Alloys Using Nanoindentation Techniques,” in High Temperature Ordered Intermetallic Alloys VIII, Materials Research Society Symposium Proceedings, v. 552, pages KK2.6.1-KK2.6.6, Materials Research Society, Pittsburgh, PA (1999).

  9. J.E. Jackson, A.L. Highsmith, M. Weaver, and T.S. Piwonka, “Materials Considerations for High Speed Ships,” in Proceedings of the Fifth International Conference on Fast Sea Transportation, Seattle, Washington, USA, 31 August - 2 September 1999.

  10. M.P. Brady, C.T. Liu, J.R. Keiser, P.F. Tortorelli, V.K. Sikka, E. Lara-Curzio, C.A. Walls, C.G. Westmoreland, C.A. Carmichael, J.L. Wright, J.D. Vought, M. Howell, H. Longmire, K.L. Crowley, and M.L. Weaver, “Development of Intermetallic-Reinforced and Oxide-Dispersion Ductilized Cr Alloys for Aggressive High-Temperature Environments,” in Proceedings of the Fourteenth Annual Conference on Fossil Energy Materials, Knoxville, TN (April 25-27, 2000), pages 5.5.1-5.5.10.

  11. F. Huang, W.S. Epling, J.A. Barnard, and M.L. Weaver, “Processing and Properties of Gamma+Laves Phase In-Situ Composite Coatings Deposited via Magnetron Sputtering,” in High Temperature Ordered Intermetallic Alloys IX, Materials Research Society Symposium Proceedings, v. 646, pages N5.24.1-N5.24.6, Materials Research Society, Pittsburgh, PA (2001).

  12. M.E. Stevenson, M.L. Weaver, and R.C. Bradt, “Microhardness Anisotropy and Indentation Size Effect (ISE) on the (100) of Single Crystal NiAl,” in High Temperature Ordered Intermetallic Alloys IX, Materials Research Society Symposium Proceedings, v. 646, pages N6.4.1-N6.4.6, Materials Research Society, Pittsburgh, PA (2001).

  13. M.L. Weaver and C.L. Hale, “Effects of Precipitation on Serrated Yielding in Inconel 718,” in Superalloys 718, 625, 706 and Various Derivatives, E.A. Loria editor, The Minerals, Metals and Materials Society, Warrendale, PA (2001), pages 421-432.

  14. M.P. Brady, I.G. Wright, I.M. Anderson, V.K. Sikka, E.K. Ohriner, C. Walls, G. Westmoreland and M.L. Weaver, “Ductilization of Cr via Oxide Dispersions,” in Proceedings of the 15th International Plansee Symposium, G. Kneringer, P. Rodhammer, and H. Wildner editors, Plansee AG, Reutte (2001), pages 108-1 - 108-13.

  15. M. P. Brady, I. M. Anderson, H. M. Meyer, L. R. Walker, M. K. Miller, D. J. Larson, V. K. Sikka, I. G. Wright, P. F. Tortorelli, J. R. Keiser, C. A. Walls and M. L. Weaver; "Management of nitrogen in chromium;" in Proceedings of the John Stringer Symposium on High Temperature Corrosion, Nov 5-8 2001; edited by P. F. Tortorelli, I. G. Wright and P. Y. Hou (Indianapolis, IN, United States: ASM International, 2001), pp. 95-105.

  16. X. Li, F. Huang, M. Curry, S.C. Street, and M.L. Weaver; ”Nanoindentation Response of Dendrimer-Mediated Soft Metallic Ultrathin Films,” in Materials Processing and Manufacturing Division Fifth Global Symposium; Surfaces and Interfaces in Nanostructured Materials and Trends in LIGA, Miniaturization and Nanoscale Materials, S.M. Mukhopadhyay, S. Seal, N. Dahotre, A. Agarwal, J.E. Smugersky, and N. Moody editors, The Minerals, Metals & Materials Society, Warrendale, PA (2004), pages 287-295.

  17. A.W. Warren, Y.B. Guo, and M.L. Weaver, ”Microscale Mechanical Behavior of Machined Surfaces by Nanoindentation," in Proceedings of the 2004 Japan-USA Symposium on Flexible Automation (JUSFA), American Society of Mechanical Engineers (ASME), Denver, CO, July 19-21 (2004).

  18. M.L. Weaver, “The Characterization and Performance of NiAl-Hf Coatings,” in Proceedings of Microscopy and Microanalysis 2004 (Microscopy and Microanalysis, volume 10, supplement 2, Cambridge University Press (2004)), Microscopy Society of America, Microbeam Analysis Society, and International Metallographic Society, Savannah, GA, August 1-5, (2004), pages 60-61. 

  19. Xiao Li, Feng Huang, S. F. Shuler, M. L. Curry, S. C. Street, and M. L. Weaver “Tailoring the Texture of Magnetron Sputtered Ta Films by Self-Assembled Dendrimer Sublayers,” in Surfaces and Interfaces in Nanostructured Materials II, Sharmila Mukhopadhyay, Narendra Dahotre, Sudipta Seal, and Arvind Agarwal editors, The Minerals, Metals & Materials Society, Warrendale, PA (2006).

  20. C. Srivastava, G.B. Thompson, D. Reinhard, J. Sebastian, T.J. Prosa, D.J. Larson, Z.T. Reddy, S. Gupta, W. Butler, and M.L. Weaver, “Atom Probe Tomography of Al-Cu Precipitation in an Al-5 at.% Cu Thin Film,” in Proceedings Microscopy and Microanalysis 2006 (Microscopy and Microanalysis, volume 12, supplement 2, Cambridge University Press (2006)), Microscopy Society of America, Microbeam Analysis Society, and International Metallographic Society, Chicago, IL, July 30 – August 3 (2006).

  21. M.A. Bestor, A.L. Brown, R.L. Martens, B. Ning, M.K. Miller, and M.L. Weaver, “Microstructures and Properties of Dispersion Strengthened Bond Coats,” to appear in Proceedings Microscopy and Microanalysis 2007 (Microscopy and Microanalysis, volume 13, supplement 2, Cambridge University Press (2007)), Microscopy Society of America, Microbeam Analysis Society, and International Metallographic Society, Fort Lauderdale, FL, August 5-9 (2007), page 1652CD.

Books or Book Chapters: (one in print)

 

  1. M.L. Weaver and M.E. Stevenson; “Introduction to the Mechanical Behavior of Non-Metallic Materials,” in ASM Metals Handbook, Volume 8, Mechanical Testing and Evaluation; H. Kuhn and D. Medlin (editors); Materials Park, OH; ASM International, pages 13-25 (2000).

 

Return to top

       

DISCLAIMER

The views, opinions, and conclusions expressed in this page are those of the author or organization and not necessarily those of The University of Alabama or its officers and trustees. The content of this page has not been reviewed or approved by the University of Alabama, and the author or organization is solely responsible for its content.