|
1
|
R. G. Reddy, S. P. Pedneker
and P. K. Rao: "Kinetics of Decarburization
of Fe-C-Cr Alloys," Trans. Ind. Inst. of Metals, Vol. 29, No.
6, p. 426-431, 1976.
|
|
2
|
R. G.
Reddy: "Electroslag Remelting
of Copper and Copper Alloys," Tech. Notes in Metallurgy, University of
Utah, Vol. 3, No. 1, p. 9, 1978.
|
|
3
|
R. G.
Reddy: "Application of Thermodynamic Data to Selection of Refractory
Crucibles for Melting of High-temperature Materials," Tech. Notes in
Metallurgy, University of Utah, Vol.3, No. 4, p. 26-31, 1978.
|
|
4
|
R. G.
Reddy and G. W. Healy: "Distribution of Cobalt Between Liquid Copper
and Copper Silicates," TMS paper selection, TMS, paper No. A80-45,
pp.1-21, 1980.
|
|
5
|
R. G.
Reddy and G. W. Healy: "The Solubility of Cobalt in Cu2O-CoO-SiO2 Slags in Equilibrium with Liquid Cu-Co Alloys," Can.
Met. Quart.,
Vol. 20(2), pp. 135-143, 1981.
|
|
6
|
R. G.
Reddy and G. W. Healy: "Distribution of Between Liquid Copper and
Copper Silicate Slag at 1523 K," Met. Trans. B, Vol. 12, pp.
509-516, 1981.
|
|
7
|
R. G.
Reddy: "The Recovery of Nonferrous Metals from Primary Copper Smelter
Discard Slags," Resources and
Conservation, International Journal, Vol. 9, pp. 333-342, 1982.
|
|
8
|
R. G.
Reddy: "The Concentration of Impurity Elements from Reverberatory Slags," U.
S. Department of the Interior, Bureau of Mines Report, 1982.
|
|
9
|
R. G.
Reddy and L. L. Oden: "Recovery of Copper
from Industrial Copper Reverberatory Slags," Advances in Sulfide Smelting, Proceedings,
ed. by H.Y. Sohn, D.B. George, A.D. Zunkel, TMS, Vol. 1, pp. 329-356, 1983.
|
|
10
|
R. G.
Reddy and C. C. Acholonu: "Activity
Coefficient of CuO0.5 in Alumina Saturated Iron Silicate Slags," Metallurgical Transactions, Vol.
15B, pp. 345-349, 1984.
|
|
11
|
R. G.
Reddy and C. C. Acholonu: "Distribution of
Nickel between Copper-Nickel and Alumina saturated Iron Silicate Slags," Metallurgical Transactions, Vol.
15B, pp. 33-37, 1984.
|
|
12
|
P. Sahoo and R.G. Reddy: "Activity of Nickel Oxide in
Fe0-Fe01.5-NiO-AlO1.5-SiO2 Slags at 1523 K," TMS Paper Selection, TMS, Paper
No. 84-40, p. 1-14, 1984.
|
|
13
|
P. Sahoo and R. G. Reddy: "The Thermodynamic Activity
of NiO in Alumina-Saturated Iron Silicate Slags at 1573K," International Symposium on Slags and Fluxes, ed. by H.A.Fine
and D.R. Gaskell, TMS, pp. 533-545, 1984.
|
|
14
|
R. G.
Reddy: "Mineral Waste Treatment and Recovery," Journal of
Metals, Vol. 37 (4), pp. 69-73, April, 1985.
|
|
15
|
R. G.
Reddy: "Solubility of Cobalt in Copper Smelting and Refining Slags," Proceedings, Second Congress, "Cobalt
Metallurgy and Uses," Cobalt Development Institute, England, pp.
89-105, 1985.
|
|
16
|
R. G.
Reddy: "Nitride Formation in Liquid Iron Alloys Under Conditions of
Electron Beam Melting," Proceedings of the Conference, Electron Beam Melting and Refining State of the Art 1985, ed. by R. Bakish, BM Inc., NJ, Vol. 2, pp. 3951, 1985.
|
|
17
|
R. G.
Reddy and V. L. Prabhu: "Treatment of
Smelting Slags for Recovery of Valuable
Metals," Recycle and Secondary Recovery of Metals, Proceedings, ed. by
P. R. Taylor, H. Y. Sohn and N. Jarrett, TMS, pp.
575-588, 1985.
|
|
18
|
R. K. Mishra and R. G. Reddy: "Pyrometallurgical
Processing and Recovery of Precious Metals from Autocatalysts
Using Plasma Arc Smelting," Precious Metals-Proceedings of the
Tenth International Precious Metals Institute Conference, ed. by U.V. Rao, IPMI, pp. 217-230, 1986.
|
|
19
|
R. G.
Reddy: "Mineral Waste Treatment and Secondary Recovery," Journal
of Metals, Vol. 38 (4), pp. 49-55, 1986.
|
|
20
|
F. Gordaninjad, R. G. Reddy, and S. D. Cromwell:
"Microscopic Characterization and Finite Element Stress Analysis of
Residual Inclusions in Carbon Steels," Effects and Control of
Inclusions and Residuals in Steels, Canadian Institute of Metallurgy,
Series 25-4/5, pp. III-1-III-18, 1986.
|
|
21
|
R. G.
Reddy and M. Blander: "Modeling of Sulfide Capacities of Silicate
Melts," Metallurgical Transactions, Vol. 38, pp. 591-596, 1987.
|
|
22
|
R. K. Mishra and R. G. Reddy: "Recovery of Precious
Metals by Pyrometallurgical Processing of
Electronic Scrap," Precious Metals, IPMI, ed. by G. Vermeylen and R. Verbeeck,
pp. 135-146, 1987.
|
|
23
|
R. G.
Reddy: "Metal, Mineral Waste processing and Secondary Recovery," Journal
of Metals, Vol. 39 (4), pp. 34-38, 1987.
|
|
24
|
R. G.
Reddy, M. Blander and B. Chen: "Thermodynamic Prediction of Sulfide
Capacities in Na2O-SiO2 Melts," International
Symposium on Molten Salts, The Electrochemical Society, pp. 156-164, 1987.
|
|
25
|
R. G.
Reddy: "Metal, Mineral Waste Processing and Secondary Recovery," Journal
of Metals, Vol. 40 (4), pp. 46-51, 1988.
|
|
26
|
H. Hu and R. G. Reddy: "Viscosities of Binary
Silicate Melts," International Symposium on Casting of Near Net Shape
Products, TMS, Warrendale, PA, USA, pp. 705-722,
1988.
|
|
27
|
P. Fisher,
R.G. Reddy and R.K. Mishra: "Recovery of
Gold and characterization of Gold Polishing Powders," Precious Metals,
IPMI, ed. by R.M. Nadkarni, pp. 203-212, 1988.
|
|
28
|
E.
Maurice, Jr. and R. G. Reddy: "Solubility and Activity Coefficient of
Y2O3 in Fluoride Melts," Rare Earths, ed. by
R.G. Bautista and M.M. Wang, TMS, pp. 377-388, 1989.
|
|
29
|
H. Hu and R. G. Reddy: "Viscosity of Spent Potliner," Light Metals, ed. by P.G. Campbell,
TMS, pp. 801-803, 1989.
|
|
30
|
R. G.
Reddy: "Metal, Mineral Waste Processing and Secondary Recovery," Journal
of Metals, Vol. 41(4), pp. 66-69, 1989.
|
|
31
|
R. G.
Reddy and M. Blander: "Sulfide Capacities of Mn0-Si02
Melts," Metall. Mater. Trans. B., Vol. 20, pp.137-140, 1989.
|
|
32
|
B. Chen,
R. G. Reddy, and M. Blander: "Sulfide Capacities of CaO-FeO-SiO2
Slags," 3rd International Conference on
Molten Slags and Fluxes, The Institute of Metals,
IMM, pp.270-272, 1989.
|
|
33
|
N. H.
Mood-Noor and R. G. Reddy: "Oxidation of WO2
Powders," Physical Chemistry of Powder Metals Production and
Processing, ed. by W. Murry Small, TMS,
pp.473-488, 1989.
|
|
34
|
E. Maurice
Jr. and R. G. Reddy: "Solubility of Rare earth oxides in Fluoride
Melts", High Temp. Mater. Chem., LBL-27905, Berkeley, CA, pp.
31-35, 1989.
|
|
35
|
H. Hu and R. G. Reddy: "Modeling of Viscosities of
Binary Alkaline-Earth Metal Oxide and Silica Melts," High Temp.
Sci., Vol. 28, pp.195-202, 1990.
|
|
36
|
R. G.
Reddy and L. Brewer: "Thermodynamic Properties of Titanium-Aluminum
Alloys," LBL Publications, Berkeley, CA, pp. 7, 1990.
|
|
37
|
B. Chen
and R. G. Reddy: "Roasting Characteristics of Refractory Gold
Ores," Gold Tech 4, SME, Littleton, CO, USA, pp.201-214, 1990.
|
|
38
|
V. L. Prabhu and R. G. Reddy: "Zinc Fuming from Slags-A steady state volatilization Model,"
International Symposium on Recycling of Metals and Engineered Materials,
ed. by J.H. Vanlinden, D.L. Stewart and Y. Sahai, TMS, pp.361-370, 1990.
|
|
39
|
R. G.
Reddy: "Kinetics of TiN Dissolution in Ti
Alloys," Proceedings of Electron Beam Melting
and Refining, ed. by R. Bakish, BM Inc., NJ, pp.
119-127, 1990.
|
|
40
|
R. G.
Reddy and K. Hebbar : "Prediction of Viscosities of Binary Silicate
Melts," EPD-Congress, TMS, de. By D.R. Gaskell, pp.523-540, 1991.
|
|
41
|
K. Hebbar and R. G. Reddy: "Viscosities of FeO-SiO2
slags," SME-AIME, 91-55, 1991.
|
|
42
|
R. G.
Reddy and A. Narayan: "Electrochemical
Studies and Anode Reaction Mechanisms of Al-Li Alloys and L2O-LiF-CaF2
Melts," Materials Science Forum, Vol.73-75, pp. 521-532, 1991.
|
|
43
|
R. G.
Reddy and K. Hebbar: "Phase Stability in
Cu-Al/TiN composites,” Electron Beam Melting and Refining- State of the Art 1991, ed. by R. Bakish, pp. 284-291, 1992.
|
|
44
|
R. G.
Reddy: "Thermodynamics of Bacterial-Mineral Reactions", Mineral Bioprocessing, TMS, ed. by R.W. Smith and M. Misren, pp. 453-468, 1991.
|
|
45
|
K.C. Chou,
W.C. Li and R.G. Reddy: "Activity and Phase diagram," J. Ber. Bunsen-Ges. Physik, Chemie, 96 (1), pp.
68-74, 1992.
|
|
46
|
S. Shrivastava and R.G. Reddy: "Viscosity of K2O-B2O3
Melts," EPD-Congress, TMS, ed. by J. P. Hager, pp. 989-1004, 1992.
|
|
47
|
R. G.
Reddy, B. Chen, S. Wang, G. L. Horter, and J. B.
Stephenson: "Solubility of Ni in Spent pickling Solutions,"
Residues and Effluents-Processing and Environmental Consideration,
ed. R.G. Reddy, W.P. Inrie and P.B. Queneac, TMS, pp. 801-813, 1992.
|
|
48
|
S. Wang,
M. Misra, R. G. Reddy, and J. C. Milbouerne: "Selenium Removal from Solutions using
Iota Chips," Residues and Effluents-Processing and Environmental
Consideration, ed. R.G. Reddy, W.P. Inrie and
P.B. Queneac, TMS, pp. 757-773, 1992.
|
|
49
|
S. G.
Kumar, A. Narayan, and R. G. Reddy:
"Thermodynamics of Li2O-LiF-CaF2 melts,"
Proceedings of 8th Symposium on Molten Salts, ed. by R.J.
Gale, G. Blomgren and N. Kojima, ECS, pp.
611-621, 1992.
|
|
50
|
R. G.
Reddy, H. Hu, and M. Blander: "Sulfide
Capacities of Silicate Slags," 4th
International Conference on Molten Slags and
Fluxes, ISIJ International, pp. 144-148, 1992.
|
|
51
|
R. G.
Reddy, J. Y. Yen, and S. Shrivastava:
"Viscosity of Na2O-B2O3 Melts,"
Molten Slags and Fluxes, ISIJ International,
pp. 450-455, 1992.
|
|
52
|
R. G.
Reddy and S. G. Kumar: "Solubility and Thermodynamic Properties of Li2O
in LiF-CaF2 Melts," Metallurgical and Materials
Transactions B, Vol. 24B, pp. 1031-1035, 1993.
|
|
53
|
R. G.
Reddy, S. Wang, and B. Chen: "Solubility of Iron in Spent Pickling
Solutions," Minerals & Metallurgical Processing, (5), pp.
102-107, 1993.
|
|
54
|
K. C.
Chou, U. B. Pal, and R. G. Reddy: "A General Model for BOP
Decarburization," ISIJ International, Vol. 33(8), pp. 862-868,
1993.
|
|
55
|
R. G.
Reddy and J. Y. Yen: "Solid Particles Effect on Viscosity of Slags," The P.E. Queneau
International Symposium on Extractive Metallurgy of Copper, Nickel and
Cobalt- Volume I: Fundamental Aspects, ed. by R.G. Reddy and R.N. Weizenbich, TMS, pp. 309-324, 1993.
|
|
56
|
S.
G. Kumar and R. G. Reddy: "Processing of Nickel based High
Temperature Materials," The P.E. Queneau
International Symposium on Extractive Metallurgy of Copper, Nickel and Cobalt-
Volume I: Fundamental Aspects, ed. by R.G. Reddy and R.N. Weizenbich, TMS, pp. 1101-1124, 1993.
|
|
57
|
R. G.
Reddy and S. G. Kumar: "In-situ Electrochemical Processing of
Lightweight Alloys," Proc. 1993 NSF Design, Service and Manufacturing
Grantees and Research Conference, The University of North Carolina at
Charlotte, ASME, Michigan, pp. 269-275, 1993.
|
|
58
|
S. G.
Kumar and R. G. Reddy: "Effect of Vacuum and Aluminum Additions on the
Deoxidation of Low Carbon Steels,"
International Symposium on Low Carbon Steels for the 90's,ed. by R. Asfahani and G.T. Ticher,
TMS, pp. 53-60, 1993.
|
|
59
|
R. G.
Reddy, S. Wang, and A. E. Torma: "A
Preliminary Thermodynamic Study of Bacterial Attachment on Uranium
Contaminated Soils from Fernald," International Biohydrometallurgy
Symposium, ed. by A.E. Torma, J.E. Way and V.L. Lakeshmanon, TMS, pp. 715-730, 1993.
|
|
60
|
R. G.
Reddy, S. Wang, and B. Chen: "Thermodynamics of Chromium Solubility in
HF -HNO3 - H2O Solutions," Proceedings of Milton
E. Wadsworth International Symposium on Hydrometallurgy, ed. by G.W. Warren
and B.J. Hiskey, SME, pp. 269-282, 1993.
|
|
61
|
S. G.
Kumar, R. G. Reddy, and P. K. Rao: "Role of Electroslag Remelting Process
in the Advanced Materials Technology," Proc. Processing Materials for Properties,
ed. by H.Henein and T. Oki, TMS, pp. 931-934,
1993.
|
|
62
|
D. M. Kocherginsky and R. G. Reddy: "In-situ Formation
of Silicon Carbide in Aluminum-Silicon Melts," Control of Interfaces
in Metal and Ceramics Composites, edited by R. Y. Lin and S. G. Fishman,
TMS, pp. 71-79, 1993.
|
|
63
|
R. G.
Reddy and S.G. Kumar: "Thermodynamics of Y2O3-LiF-YF3
Melts," Electrochemical Technology of Molten Salts, ed. by C.A. L. Sequeira and G.S. Picard, Trans. Tech. Publ., Molten
Salt Forum, Vol. 1 & 2, pp. 233-242, 1993-94.
|
|
64
|
R. G.
Reddy and S. G. Kumar: "Solubility and Thermodynamic Properties of Y2O3
in LiF - YF3 Melts,"
Metallurgical and Materials Trans. B, 25B, pp. 91-96, 1994.
|
|
65
|
S. G.
Kumar, R. G. Reddy and H. M. Nerurkar:
"Effect of Slag Composition and Vacuum on the Deoxidation
Behavior of High Carbon Steel," EPD Congress, ed. by G. Warren, TMS,
pp. 701-711, 1994.
|
|
66
|
P. T. Velu and R. G. Reddy: "Thermodynamic Properties of
CeO2 in Fluoride Melts," EPD Congress, ed. by G. Warren,
TMS, pp. 1163-1169, 1994.
|
|
67
|
R. G.
Reddy: "In-situ Electrochemical Processing of Lightweight
Alloys," Proc. 1994 NSF Design, Service and Manufacturing Grantees and
Research Conference, ASME, Michigan, pp. 631-632, 1994.
|
|
68
|
S. Wang
and R. G. Reddy: "Experimental Determination of Vapor Pressures of KCl," Molten Salts, ed. by C.L. Hussey, P.S.
Newman, G. Mamantov and Y. Iro,
ECS, pp. 146-155, 1994.
|
|
69
|
R. G.
Reddy, A. R. Narayan, and P. T. Velu: "Anode Over voltage on Graphite in Li2O-LiF-CaF2
Melts," Molten Salts, ed. by C.L. Hussey, P.S. Newman, G. Mamantor and Y. Iro, ECS, pp.
385-391, 1994.
|
|
70
|
S. Wang,
R. G. Reddy, and A. E. Torma: "Biotreatment of Uranium Contaminated Soils,"
Metallurgical Processes for the Early Twenty First Century, editor H. Y. Sohn, TMS, Vol. I, pp. 583-589, 1994.
|
|
71
|
D. M. Kocherginsky, R. G. Reddy, L. M. Soifer,
and V. V. Mechev: "Direct Conversion of High
Grade Nickel Matte to Nickel," Metallurgical Processes for the Early
Twenty First Century, ed. by H.Y. Sohn, TMS, pp.
373-381, 1994.
|
|
72
|
S. G.
Kumar and R. G. Reddy: "Processing of Structural Materials in
Microgravity," The 6th International Symposium on Experimental
Methods for Microgravity Materials Science, ed. by R.A. Schiffman
and J.B. Andrews, TMS, pp. 175-183, 1994.
|
|
73
|
R. G.
Reddy and S. Brown: "Pyrolysis of Spent Potliner (SPL)," Metals and Materials Waste
Reduction, Recovery and Remediation, ed. by K.C. Liddel,
R.G. Bautista and R.J. Orith, TMS, pp. 163-170,
1994.
|
|
74
|
S. G.
Kumar, R. G. Reddy, and L. Brewer: "Phase Equilibria
in Ti3Al-Nb Alloys at 10000C," J. of Phase Equilibria, Vol. 15, No. 3, pp. 279-284, 1994.
|
|
75
|
M. E. Dewiche, J. E. Wey, A. E. Torma,
G. E. Matthern, R. G. Reddy, D. T. Maiers, and J. C. Cunnane:
“Bioremediation of Uranium Contaminated Fernald Soils,” Symp.
On Waste Management, Laser Options, Inc. Publ., pp. 2093-2097, 1994.
|
|
76
|
R. G.
Reddy and P. T. Velu: “In-Situ Electrochemical
Processing of Light-Weight Alloys,” Proc. 1995 NSF Design and Manufacturing
Conference, ASME, Michigan, pp. 481-482, 1995.
|
|
77
|
S. G.
Kumar, R. G. Reddy, J. Wu and J. Holthus:
"Evaluation of Microstructure and Phase Relations in a Powder
Processed Ti-44Al-12Nb Alloy," Journal of Materials Engineering and
Performance, vol. 4, pp. 63-69, 1995.
|
|
78
|
S. Wang,
R. G. Reddy, and A. E. Torma: “Evaluation of
Uranium Contaminated Soils,” New Remediation Technology in the Changing
Environmental Arena, ed. by B.J. Scheiner, T.D. Chatwin, H. EI-Shall, S.K. Kawatra
and A.E. Torma, SME, 22, pp. 157-162, 1995.
|
|
79
|
R. G.
Reddy and K. N. Hebbar: “Vitrification
of Spent Potliners,” New Remediation Technology
in the Changing Environmental Arena, by B.J. Scheiner,
T.D. Chatwin, H. EI-Shall, S.K. Kawatra and A.E. Torma, SME,
24, pp. 171-175, 1995.
|
|
80
|
W. Zhao
and R. G. Reddy: “Sulfide Capacities of CaO-AlO1.5 Metals,” EPD
Congress, ed. by G. Warren, TMS, pp. 39-47, 1995.
|
|
81
|
P. T. Velu and R. G. Reddy: "Solubility of Li2CO3
in LiF-CaF2 Electrolyte by EMF Measurements", Proc. Trace
and Reactive Metals: Processing and Technology, ed. by R.G. Reddy and B. Mishra, TMS, pp. 71-80, 1995.
|
|
82
|
D. M. Kocherginsky and R. G. Reddy: "In situ Processing
of Al/SiC Composite", Proc. In Situ
Reactions for Synthesis of Composites, Ceramics, and Intermetallics,
ed. by E.V. Barrera, F.D.S. Marquis, W.E. Frazier, S.G. Fishman, N.N. Thadhan and Z.A. Munir, TMS,
pp. 159-167, 1995.
|
|
83
|
M. N.
Ahmad and R. G. Reddy: "Recycling of Chrome Containing Materials
Herein-Before-Land-Filled", Proceedings of HAZMACON’ 95 ABAG, ed. by
T. Bursztynsky and M.L. Loss, CA, Association of
Bay Area Governments, Oakland, CA, pp. 514-525, 1995.
|
|
84
|
R. G.
Reddy and W. Zhao: "Sulfide Capacities of Na2O-SiO2
Melts", Metallurgical and Materials Transactions B, 26B,
pp. 925-928, 1995.
|
|
85
|
S. G.
Kumar and R. G. Reddy: "Effect of Processing on Oxygen Content and Phase
Relations in Lightweight Titanium Aluminides,"
Proc. Intl. Symp. on Synthesis/Processing of
Lightweight Metallic Materials, ed. by F.H. Frees, C. Suriyanarayanan
and C.M. Ward-Close TMS, pp.129-139, 1995.
|
|
86
|
S. G.
Kumar and R. G. Reddy: "Processing of a Nb3Al-Ti Ternary
Alloy from Elemental and Prealloyed
Powders," Design fundamentals of High-Temperature Composites, Intermetallics and Metal-Ceramic Systems, ed. by R.Y.
Lin, Y.A. Chang, R.G. Reddy and C.T. Liu, TMS, pp. 213-222, 1996.
|
|
87
|
R. G.
Reddy and P. T. Velu: "In-situ
Electrochemical Processing of Light-Weight Alloys: Anodic Over voltage
Measurement", Proceedings of the 1996 NSF Design and Manufacturing
Guarantees and Research Conference, The University of New Mexico and Sandia
National Lab, SME, pp. 427-428, 1996.
|
|
88
|
P. T. Velu and R. G. Reddy: "Anodic Over voltage on
Graphite in Li2CO3-LiF-CaF2 Melts", Light
Metals, ed. by W. Hale, TMS, pp. 1139-1147, 1996.
|
|
89
|
R. Singareddy and R. G. Reddy: "Evaluation of
Thermodynamics of Solute Oxygen in Ternary Liquid Alloys," Design
Fundamentals of High-Temperature Composites, Intermetallics
and Metal-Ceramic Systems, ed. by R.Y. Lin, Y.A. Chang, R.G. Reddy and C.T.
Liu, TMS, pp. 323-336, 1996.
|
|
90
|
Z. Cai and R. G. Reddy: "Removal of Radionuclides Using Zeolites",
Light Metals, ed. by W. Hale, TMS, Warrendale,
USA, pp. 1173-1180, 1996.
|
|
91
|
S. C. Torma, R. G. Reddy, and A. E. Torma:
"Process Technologies for Remediation of Lead Contaminated Soil",
ed. by S.C. Torma, R. G. Reddy and A. E. Terma, SME, 96-47, pp. 7, 1996.
|
|
92
|
R. G.
Reddy, J. Y. Yen, and Z. Zhang: "Chemical Properties of Sodium Borate
Coating", Proc. High Temperature Coatings, ed. by N.B. Dahatre, TMS, pp. 31-46, 1996.
|
|
93
|
R. G.
Reddy and S. R. Reddy: "Thermodynamic Modeling of Molten Metal
Systems", Emerging Separation Technologies for metals, Engineering
Foundation Conference, ed. by R.G. Bautista, TMS, pp.17-34, 1996.
|
|
94
|
S. G.
Kumar and R. G. Reddy: "Microstructure and Phase Relations in a Powder
Processed Ti-22Al-12Nb Alloy", Metallurgical and Materials
Transactions A, 27A, pp. 1121-1126, 1996.
|
|
95
|
X. Wen and R.G. Reddy: "Oxidation Behavior of Ti3Al",
Processing and Fabrication of Advanced Materials V, ed. by T.S. Srivatsan and J.J. Moore, TMS, pp. 37-389, 1996.
|
|
96
|
S. Wang
and R. G. Reddy: "Low Melting Fluxes for Recycling of Al Scrap",
Second International Symposium on Extraction and processing for the
Treatment and Minimization of Wastes, ed. by V. Ramachandran
and C.C. Nesbitt, TMS, pp. 37-389, 1996.
|
|
97
|
J. U. Ejiofor and R. G. Reddy: "Microstructural
and Tribological Property Evaluation of Char
Reinforced Al-Si Alloy Composites", Automotive Alloys, ed. by
S. K. Das, TMS, pp. 95-112, 1997.
|
|
98
|
R. G.
Reddy and X. Wen: "Oxidation Behavior of Al3Ti
Intermetallics", EPD Congress, ed. by B. Mashra, TMS, pp. 47-54, 1997.
|
|
99
|
R. G.
Reddy, J. Y. Yen, and Z. Zhang: "Viscosity of Na2O-SiO2-B2O3
Melt", 5th International Conference on Molten Slags, Fluxes and Salts ’97, ed. by G.R. Belton, S. Jahanshahi, TMS, pp. 203-213, 1997.
|
|
100
|
P. T. Velu and R. G. Reddy: "Sensor for EMF Measurements
in Molten Salt Electrolysis", ed. by S. Viswanathan,
R.G. Reddy and J.C. Malas, TMS, pp. 361-371, 1997.
|
|
101
|
S. Wang
and R. G. Reddy: “Vapor Pressure Studies of the Salt Fluxes,” Light Metals
1997, ed. by R. Huglen, TMS, pp. 207-210, 1997.
|
|
102
|
R. G.
Reddy and P. T. Velu: "In-situ
Electrochemical Processing of Lightweight Alloys", Proceedings of the
1997 NSF Design, Service and Manufacturing Grantees and Research
Conference, University of Washington, Seattle, Washington, ASME, pp.
271-272, 1997.
|
|
103
|
J. U. Ejiofor, B. A. Okorie, and R.
G. Reddy: “Powder Processing and Properties Evaluation of Zircon Reinforced
Al-13.5Si-2.5Mg Alloy Composites", Journal of Materials Engineering
and Performance, Vol. 6(3), pp. 326-334, 1997.
|
|
104
|
R. G.
Reddy, X. Wen, and Y. Li: "Oxidation of Ti3Al
and Ti3Al-Nb Intermetallics", Titanium
Extraction and Processing, ed. by B. Mishra
and G. J. Kipouros, TMS, pp. 153-161, 1997.
|
|
105
|
J. U. Ejiofor and R. G. Reddy: "Developments in the
Processing and Properties of Particulate Al-Si Alloy Composites", Journal
of Metals (JOM), Vol. 49, pp. 31-37, 1997.
|
|
106
|
J. U. Ejiofor and R. G. Reddy: "Effects of Porous Carbon
on Sintered Al-Si-Mg Matrix Composites", Journal of Materials
Engineering and Performance, Vol. 6(6), pp. 785-791, 1997.
|
|
107
|
R. G.
Reddy and M. V. Klein: "Kinetics of Chromite
Reduction with Carbon", Proceedings of The Julian Szekely
Memorial Symposium on Materials Processing, ed. by H.Y. Sohn,
J.W. Evans and D. Apelian, TMS, pp. 271-284, 1997.
|
|
108
|
A. E. Torma and R. G. Reddy: “Microbial Extraction of Cadmium
from Sulfide Mineral Resources,” Metall., 7/8, vol. 51, pp. 390-392, 1997.
|
|
109
|
J. U. Ejiofor B. A. Okorie, and R.
G. Reddy: “Synthesis and Properties Analysis of Char-reinforced
Al-13.5Si-2.5Mg Alloy Composites,” Journal of Materials Science, 33, pp.
1003-1013, 1998.
|
|
110
|
R. S. Chiou, P. T. Velu, and R. G.
Reddy: "Thermodynamic Modeling of Calciothermic
Reduction of NdCl3", Light Metals, ed. by B. Welch,
TMS, pp. 1327-1331, 1998.
|
|
111
|
K. G.
Cook, J. U. Ejiofor, and R. G. Reddy:
"Centrifugal Casting of Aluminum Alloy Tubular Components", The
International Symposium on Cast Shop Technology, Light Metals, ed. by B.
Welch, TMS, pp. 1191-1196, 1998.
|
|
112
|
Z. Zhang
and R. G. Reddy: "Viscosity of Na2O-SiO2-B2O3
Ternary Melts", EPD Congress’98, ed. by B. Mishra,
TMS, pp. 957-970, 1998.
|
|
113
|
R. G.
Reddy and R. B. Inturi, and M. V. Klein: “Low
Temperature Reduction of Chromite Ores with
Carbon,” EPD Congress ’98, ed. by B. Mishra, TMS,
pp. 697-715, 1998.
|
|
114
|
X. Wen and R. G. Reddy: "Oxidation Behavior of TiAl3",
EPD Congress’98, ed. by B. Mishra, TMS, pp.
903-924, 1998.
|
|
115
|
R. G.
Reddy and R. B. Inturi: "Reduction of Roast Movat Chromite Ore with
Carbon", SME, paper #.98-50, 1998.
|
|
116
|
R. G.
Reddy: "A Novel Manufacturing Process for Lightweight Alloy
Composites", Proceedings of The 1998 NSF Design, Service and
Manufacturing Grantees and Research Conference, NSF, Arlington, VA, pp.
549-550, 1998.
|
|
117
|
R. G.
Reddy and R. K. Mishra: "Characterization of
Polishing Dust for Gold Recovery", The Santa Te Symposium on JMT,
ed. D. Schneller, Albuquerque, New Mexico, pp.
217-236,1998.
|
|
118
|
J. U. Ejiofer, G. F. Fernando, and R. G. Reddy:
"Radiographic Inspection of Reaction-Sintered Discontinuously Reinforced
Al-Si Alloy Composites", Journal of Materials Science, 33, pp.
4029-4033, 1998.
|
|
119
|
R. G.
Reddy: "A Novel Manufacturing Process for Lightweight Alloy
Composites", Composites in Manufacturing, Vol. 14 (3), pp. 5-7,
1998.
|
|
120
|
J. U. Ejiofor and R. G. Reddy: "Interfaces and
properties of Al-Si Alloy Zircon Particulate Composites", Journal
of Materials Research, vol. 13 (11), pp. 3093-3099, 1998.
|
|
121
|
Z. Zhang
and R. G. Reddy: "Viscosity Measurement and Modeling of Borate and Borosilicate
Melts", Fluid Flow Phenomena in Metals Processing, ed. by N.
El-Kaddah, D.G.C. Robertson, S.T. Johansen and
V.R. Voller, TMS, pp. 253-260, 1999.
|
|
122
|
Z. Zhang,
R. G. Reddy, and S. Viswanathan: "Viscosity Measurement
of Aluminum Alloy Containing SiC
Particulates", Fluid Flow Phenomena in Metals Processing, ed.
by N. El-Kaddah, D.G.C. Robertson, S.T. Johansen
and V.R. Voller, TMS, pp. 543-550, 1999.
|
|
123
|
S. W.
White and R. G. Reddy: "Waste Processing of MgO
Bag house Dust Using Plasma Arc Technology", EPD Congress, ed. by B. Mishra, TMS, pp. 687-697, 1999.
|
|
124
|
K. G. Cook
and R. G. Reddy: "Influence of Mold Coating Properties on Aluminum
Alloy Centrifugal Castings", Light Metals, ed. by C.E. Eckert, TMS,
pp. 959-966, 1999.
|
|
125
|
M. K.
Mohan and R. G. Reddy: "Recovery of Lead from Process Solutions",
EPD Congress, ed. by B. Mishra, TMS, pp. 905-918,
1999.
|
|
126
|
M. K.
Mohan and R. G. Reddy: "Recovery of Antimony from Process
Solutions", EPD Congress, ed. by B. Mishra,
TMS, pp. 965-978, 1999.
|
|
127
|
M. K.
Mohan and R. G. Reddy: "Processing of Radionuclide Waste", Recent
Res. Devel. Metallurg.
& Materials Sci., vol. 3, pp. 49-69, 1999.
|
|
128
|
R. G.
Reddy and R. B. Inturi: "Reduction of Roast Movat Chromite Ore with
Carbon", Minerals & Metallurgical Processing Journal, Vol.
16 (20), pp. 46-50, 1999.
|
|
129
|
R. G.
Reddy and S. Shrivastava: “Utilization of Spent Potliners as a Fluidizer”, SME,
paper # 99-111, 1999.
|
|
130
|
J. U. Ejiofor and R. G. Reddy: "Characterization of
Pressure-assisted Sintered Al-Si Composites", Materials Science and
Engineering, A259, pp. 314-323, 1999.
|
|
131
|
S. R.
Reddy and R. G. Reddy: "Thermodynamic Properties of Quaternary
Systems", Metal Separation Technologies Beyond 2000: Integrating Novel
Chemistry with Processing, United Engineering Foundation Conference
Proceedings, ed. by K.C. Liddel and D.J. Chaiko, TMS, pp. 243-253, 1999.
|
|
132
|
M. K.
Mohan and R. G. Reddy: Treatment of Wastes Containing Radionuclides, REWAS’99
Global Symposium on Recycling, Waste Treatment and clean technology, ed. by
I. Gaballah, J. Hager and R. Solozabal,
Spain, Vol I, pp. 857-868, 1999.
|
|
133
|
X. Wen and R. G. Reddy, "Oxidation of TiAl Intermetallics", Long
Term Stability of High Temperature Materials, Ed. G. E. Fuchs, K. A. Dannemann and T. C. Deragon,
TMS, pp. 201-217, 1999.
|
|
134
|
R. G.
Reddy: "Impurity Removal from Copper Smelter Slags",
Impurities 2000, ed. by C. Young, SME, pp. 239-249, 2000.
|
|
135
|
S, Niyomwas, B. Wu, and R. G. Reddy, "Modeling of
Materials Synthesis in Thermal Plasma Reactor", Materials
Processing in the Computer Age III, ed. by V. R. Voller
et al, TMS, pp. 199-210, 2000.
|
|
136
|
S. W.
White, R. G. Reddy, and B. Wu, "Plasma
Processing of Waste MgO Dust," Light
Metal 2000, ed. by R. D. Peterson, TMS, pp. 871-883, 2000.
|
|
137
|
B. Wu and
R. G. Reddy, "A Novel Manufacturing Process for Aluminum Alloy
Composites", Proceeding of 2000 NSF Design and Manufacturing
Grantees Conference, ASME, paper # 339, 2000.
|
|
138
|
S.
McElroy, D. Yang, and R. G. Reddy, "Laser Surface Modification of TiAl Intermetallics",
Surface Engineering: In Materials Science I, ed. by S. Seal, N. B. Dahotre, J. J. Moore, and B. Mishra,
TMS, pp. 89-99, 2000.
|
|
139
|
S. Niyomwas,
B. Wu, and R. G. Reddy, "Synthesis and Modeling of Fe-TiN Composites by Thermal Plasma Processing",
Ultrafine Grained Materials, ed. by C. Suryanarayana,
N. N. Thadhani, and T. C. Lowe, TMS, pp. 89-98,
2000.
|
|
140
|
S.
McElroy, D. Yang, and R. G. Reddy, "Laser Processing of Titanium Aluminides", Journal of Materials Engineering
and Performance (JMEPEG), Vol. 9 (5), pp 506- 515, 2000.
|
|
141
|
R. G.
Reddy and Z. Zhang, "Viscosity Measurements of Lead Slags", Recycling of Metals and Engineered
Materials, ed. by D. L. Stewart, Jr., J. C. Daley and R. L. Stephens, TMS,
pp. 153-163, 2000.
|
|
142
|
Q. Zheng, R. G. Reddy, and B. Wu, "In-Situ Processing
of AlN – Al alloy Composites” State of the Art in
Cast MMC’s, ed. by P. K. Rohatgi, TMS, pp 1-12,
2000.
|
|
143
|
B. Wu, R.
G. Reddy, and R. D. Rogers, "The 4th International
Symposium on Aluminum Recycling via Room Temperature Electrolysis in Ionic
Liquids," Recycling of Metals and Engineered Materials, ed. by D. L.
Stewart, Jr., J. C. Daley and R. L. Stephens, TMS, pp. 845-856, 2000.
|
|
144
|
M. K.
Mohan and R. G. Reddy, "Processing of waste solutions Containing Heavy
Metals", Proceedings of the International Conference on Environmental
Management in Metallurgical Industries (EMMI-2000), ed. by R.C. Gupta, S.N.
Ojha, J.P. Pathak, and
Sunil Mohan, Banaras Hindu University, Varanasi, India, pp. 225-232, 2000.
|
|
145
|
A. Pelton and R. G. Reddy, Foreword, The Milton Blander Symposium
on Thermodynamic Predictions and Applications, Metallurgical and Materials
Transactions B, Vol. 31B, pp. 577-578, 2000.
|
|
146
|
R. G.
Reddy, Editorial, Journal of Phase Equilibria,
Vol.21, No. 3, pp. 218, 2000.
|
|
147
|
R. G. Reddy, X, Wen and C. I. Okafor,
"Diffusion of oxygen in Al2O3 oxidation product
of TiAl3", Metallurgical and Materials Transactions A,
Vol. 31A, pp. 3023-3028, 2000.
|
|
148
|
R. G.
Reddy and S. Shrivastava, "Viscosity of
Spent Potliner Mixed with Additives", Minerals
& Metallurgical Processing, Vol. 18 (2), pp. 95-100, 2001.
|
|
149
|
R. G.
Reddy, A. M. Yahya and L. Brewer,
"Thermodynamic Properties of Ti-Al Intermetallics",
Journal of Alloys and Compounds, Vol. 321, pp. 223-227, 2001.
|
|
150
|
R. G. Reddy
and Q. Zheng, "A Novel Manufacturing Process
for Aluminum Alloy Composite", Proceeding of 2001 NSF Design and
Manufacturing Grantees Conference, ASME, (CD), paper MPM-59, 2001.
|
|
151
|
Z. Zhang
and R. G. Reddy, "Distribution of Various Structural Species in Alakali Borate Melts", EPD Congress 2001, ed. by
P. R. Taylor, TMS, pp. 353-367, 2001.
|
|
152
|
R. G.
Reddy and K. Hebbar, "Viscosity of FeO-SiO2
Slags", Minerals & Metallurgical
Processing, Vol. 18(4), pp. 195-199, 2001.
|
|
153
|
B. Wu, R.
G. Reddy and R. D. Rogers, "Novel Ionic Liquid Thermal Storage for
Solar Thermal Electric Power Systems", Forum 2001, Solar Energy: The
Power to Choose, ed. by R. Cambell-Howe, ASES,
(CD), 7pp, 2001.
|
|
154
|
R. G.
Reddy, X. Wen and I. C. Okafor,
"Interdiffusion of Oxygen in TiO2
oxidation Products of Ti3Al", Metallurgical and
Materials Transactions A, Vol. 32A, pp. 491-495, 2001.
|
|
155
|
Z. Zhang,
R. G. Reddy, and S. Viswanathan,
"Viscosities of Semisolid Aluminum Alloys and Composites",
Proceedings of M. C. Flemings Symposium on Solidification and Materials
Processing, ed. by R. Abbaschian, H. Brody and A.
Mortensen , TMS, pp. 267 – 271, 2001.
|
|
156
|
R. G.
Reddy, "The Pyro- and Hydrometallurgical
Processing of Uranium-containing Waste", Journal of Metals
(JOM), Vol. 53, pp. 21-24, 2001.
|
|
157
|
B. Wu, R.
G. Reddy and R. D. Rogers, "Aluminum reduction via Near Room
Temperature Electrolysis in Ionic Liquids", Light Metals 2001,
ed. by J. L. Anjier, TMS, pp. 237-243, 2001.
|
|
158
|
Q. Zheng and R. G. Reddy, "In Situ Processing of
Al-alloy Matrix Composites", Affordable Metal-Matrix Composites for
High Performance Applications, ed. by A. B. Pandey,
K. L. Kendig and T. J. Watson, TMS, pp. 199-210,
2001.
|
|
159
|
R. G.
Reddy, X. Wen and M. Divakar,
"Isothermal Oxidation Studies on TiAl",
Metallurgical and Materials Transactions A, Vol. 32A, pp. 2357-2361,
2001.
|
|
160
|
S.
K. Kim and R. G. Reddy, "Recent Advances in Electrodeposition
Technology", Journal of the Korean Institute of Surface Engineering,
Vol. 34, No. 6, pp. 553-567, 2001.
|
|
161
|
R.
G. Reddy and Y. Li, "Isothermal Oxidation of a Ternary TiAl-Nb Alloy", High Temperature Materials and
Processes, Vol. 20, No. 5-6, pp. 319-331, 2001.
|
|
162
|
Q.
Zheng, B. Wu, and R. G. Reddy, "In-situ
Formation of AlN Reinforced Al Alloy Composites
Using Ammonia", Lightweight Alloys for Aerospace Application,
eds. K. Jata, E. W. Lee, W. Frazier, and N.
J. Kim, TMS, Warrendale, PA, USA, pp. 295-307,
2001
|
|
163
|
R.
N. Reddy and R. G. Reddy, "Manganese Oxide Composites As Electrode
Materials for Electrochemical Capacitors", Fundamentals of Advanced
Materials for Energy Conversion, ed. by D. Chandra and R. G. Bautista,
TMS, pp. 75-81, 2002.
|
|
164
|
A.
Kumar and R.G. Reddy, "PEM Fuel Cell Bipolar Plate – Materials
Selection, Design and Integration", Fundamentals of Advanced
Materials for Energy Conversion, ed. by D. Chandra and R. G. Bautista,
TMS, pp. 41-53, 2002.
|
|
165
|
Z.
Zhang, M. Arenas and R. G. Reddy, "Fluidity of Slags
from Waste Incinerators", EPD Congress, ed. by P. R. Taylor, TMS, pp.
801-809, 2002.
|
|
166
|
Z.
Zhang and R. G. Reddy, "Thermal Stability of Ionic Liquids", Fundamentals
of Advanced Materials for Energy Conversion, ed. by D. Chandra and R.
G. Bautista, TMS, pp. 33-39, 2002.
|
|
167
|
Z.
Zhang and R. G. Reddy, "Viscosity of Lead Silicate Slags",
Minerals & Metallurgical Processing, Vol
19, No. 1, pp. 37-42, 2002.
|
|
168
|
V.
Kamavaram and R. G. Reddy, "Electrochemical
Studies of Aluminum Deposition in Ionic Liquids at ambient
Temperatures", Light Metals, ed. by W. Schneider, TMS, pp.
253-258, 2002.
|
|
169
|
Q.
Zheng and R. G. Reddy, "In-Situ processing
of Al Alloy Matrix Composites Using Gas- bubbling Method", Proceeding
of the 2002 NSF Design, Service and Manufacturing Grantees and Research
Conference, Iowa State University, Ames, Iowa, USA, pp. 2144-2146, 2002.
|
|
170
|
R.
G. Reddy, "In Situ formation of Multi-layer formation in the Oxidation
of Ti3Al-Nb", Journal of Metals (JOM), Vol. 54 (2),
pp. 65-67, 2002.
|
|
171
|
V. Kamavaram and R. G. Reddy, "Recycling of Al-MMC in
Ionic Liquids at Near Room Temperature", ICCE/9, Proceedings of
International Conference on Composites Engineering, ed. by David Hui, University of New Orleans, USA, pp. 359-360, 2002.
|
|
172
|
B.
Wu and R. G. Reddy, "In-situ formation of SiC
Reinforced Al-Si alloy Composites using Methane Gas Mixtures", Metallurgical
and Materials Transactions B, Vol. 33B, pp. 543-550, 2002.
|
|
173
|
R.
G. Reddy and J. M. Font, "Arsenic Capacities of FeO-CaO-MgO-SiO2 Slags", Mills Symposium- Metals, Slags, Glasses: High Temperature Properties &
Phenomena, Proceedings, ed. by R. E. Aune and S.
Sridhar, NPL Publication, Middlesex, UK, Vol. 2, pp. 451-464, 2002.
|
|
174
|
B.
Derin and R. G. Reddy, "Modeling of Sulfide Capacities of FeO based Ternary Silicate Melts", International
Metallurgy and Materials Congress, UCET, Istanbul, Turkey, pp. 54-62,
2002.
|
|
175
|
V.
Kamavaram and R. G. Reddy, "Recycling of
Aluminum Based Materials in Ionic Liquids", Recycling and Waste
Treatment in Mineral and Metal Processing: Technical and Economic Aspects
Proceedings, ed. by B. Bjorkman, C.
Samuelsson, and J. O. Wikstrom, TMS, MEFOS, Luleå, Sweden;
Vol. 2, pp. 517-526, 2002.
|
|
176
|
R.
G. Reddy, Y. Li and M. F. Arenas, "Oxidation of Ternary Ti3Al-Ta
Alloys", High Temperature Materials and Processes, vol. 21, No. 4, pp.
195-205, 2002.
|
|
177
|
V.
Kamavaram and R. G. Reddy, "Electrorefining of Aluminum in HMIC-AlCl3 Ionic Liquids
at Near Room Temperature", Molten Salts XIII 2002, ed. by H. C.
Delong, R. W. Bradshaw, M. Matsunaga, G. R.
Stafford, and P. C. Trulove, ECS, pp. 840-846,
2002.
|
|
178
|
R.
N. Reddy and R. G. Reddy, "MnO2 as electrode materials for electrochemical
capacitors", Electrochemical Capacitors and Hybrid Power Sources, ed.
by R. J. Brodd, D. H. Doughty, K. Naoi, M. Morita, C. Nanjundiah,
J. H. Kim and Nagasubramanian, ECS, pp. 197-204,
2002.
|
|
179
|
R.
G. Reddy, V. L. Prabhu, and D. Mantha, "Zinc Fuming from Lead Blast Furnace
Slag", High Temperature Materials and Processes, Vol. 21, No.6,
pp. 377-386, 2002.
|
|
180
|
A.
Kumar and R. G. Reddy, "Effect of channel dimensions and shape in the
flow-field distributor on the performance of polymer electrolyte membrane
fuel cells", Journal of Power Sources, Vol. 113, No.1, pp.
11-18, 2003.
|
|
181
|
R.
N. Reddy and R. G. Reddy, "Sol-gel Prepared MnO2 as
Electrode Material for Electrochemical Capacitors", 2003 NSF
Design, Service and Manufacturing Grantees and Research Conference, ed. by
R.G. Reddy, The University of Alabama, Tuscaloosa, AL USA, pp. 3601-3611,
2003.
|
|
182
|
Qingjun Zheng and R. G. Reddy, “Manufacturing of Al Composites
Reinforced with SiC and Al,” 2003 NSF Design,
Service, and Manufacturing Grantees and Research Conference, ed. R.G.
Reddy, The University of Alabama, Tuscaloosa, AL, USA, pp.
2262-2266, 2003.
|
|
183
|
R. G.
Reddy, "Impurity Capacities in Metallurgical Slags",
(Plenary Lecture), Yazawa
International Symposium, Materials Processing Fundamentals and New
Technologies, ed. by F. Kongoli,
et.al., TMS, Vol. 1, pp. 25-48, 2003.
|
|
184
|
L.
V. M. Antony and R. G. Reddy, "Processes for Production of High-Purity
Metal Powders", Journal of Metals (JOM), Vol. 55 (3), pp.
14-18, 2003.
|
|
185
|
R.
G. Reddy and L. V. M. Antony, "The Thermal Plasma Processing of Fine
Powders", Journal of Metals (JOM), Vol. 55 (3), pp. 19-22,
2003.
|
|
186
|
B.
Derin and R. G. Reddy, "Sulfur and Oxygen Partial Pressure Ratios
Prediction in Copper Flash Smelting Plants Using Reddy-Blander Model",
Yazawa International Symposium,
Materials Processing Fundamentals and New Technologies, ed. by F. Kongoli, et.al., TMS, Vol. 1, pp. 625-632, 2003.
|
|
187
|
A.
Kumar and R. G. Reddy, “Modeling of a Polymer Electrolyte Membrane Fuel
Cell with metal foam in the flow field of the bipolar/end plates”, Journal
of Power Sources, Vol. 114, No. 1, pp. 54-62, 2003.
|
|
188
|
J.
M. Font and R. G. Reddy, "Modeling of Arsenic Distribution Between Slags and Copper Mattes or Liquid Copper", Yazawa International Symposium, Materials
Processing Fundamentals and New Technologies, ed. by F. Kongoli,
et.al., TMS, Vol. 1, pp. 991-1003, 2003.
|
|
189
|
R.
G. Reddy, “Emerging Technologies in Extraction and Processing of Metals”, 2002
Extraction and Processing Distinguished Lecture, Metallurgical and
Materials Transactions B, Vol. 34B, pp. 137-152, 2003.
|
|
190
|
Q.
Zheng, B. Wu, and R. G. Reddy, "In-situ
Processing of Al alloy Composites", Advanced Engineering Materials,
5(3): 167-172, 2003.
|
|
191
|
R.
G. Reddy and J. M. Font, “Arsenic Capacities of Copper Smelting Slags”, Metallurgical and Materials Transactions B,
Vol. 34B, pp. 565-571, 2003.
|
|
192
|
M.
F. Arenas and R. G. Reddy, “Corrosion of Steel in Ionic Liquids”, Journal
of Mining and Metallurgy B, Vol. 39 (1-2) B, pp. 81-91, 2003.
|
|
193
|
V.
Kamavaram, D. Mantha
and R. G. Reddy, "Electrorefining of
Aluminum Alloy in Ionic Liquids at Low Temperatures", Journal of
Mining and Metallurgy B, Vol. 39(1-2) B, pp.43-58, 2003.
|
|
194
|
R.
G. Reddy, V. L. Prabhu, and D. Mantha, "Kinetics of Reduction of Copper Oxide
from Liquid Slags using Carbon", High
Temperature Materials and Processes, Vol. 22 (1), pp. 25-33, 2003.
|
|
195
|
R.
N. Reddy and R. G. Reddy, "Sol-gel MnO2 as an electrode
materials for electrochemical capacitors", Journal of Power Sources,
Vol. 124, pp.330-337, 2003.
|
|
196
|
Q.
Zheng and R.G. Reddy, “Assessment of Thermodynamic
Stability of Reinforcements in Aluminum Alloy Melt,” High Temperature
Materials and Processes, 22 (1), pp. 35-45, 2003.
|
|
197
|
V.
Kamavaram and R.G. Reddy, “Physical and Thermal
Properties of Ionic Liquids used in Aluminum Electrorefining
at Low Temperatures,” Aluminum 2003, ed. S. K. Das, TMS, pp.
299-307, 2003.
|
|
198
|
Q.
Zheng and R. G. Reddy, “Development of
discontinuously Reinforced Aluminum Alloy Composites for Automotive
Applications,” Aluminum 2003, ed. S. K. Das. TMS, pp. 87-96, 2003.
|
|
199
|
R.
G. Reddy, “Processing of Nanoscale Materials”, Rev.
Adv. Mater. Sci., Vol 4, pp. 127-139, 2003.
|
|
200
|
Q. Zheng
and R.G. Reddy, “Effects of Oxygen Impurities on In-situ Formation
of AlN-Al Composites from Nitrogen Bubbling Gas,”
Affordable Metal Matrix Composites for High Performance Applications II,
edited by A. B. Pandey, K. L. Kendig,
J. J. Lewandowski and S. R. Shah, TMS, Warrendale,
pp. 125-134, 2003.
|
|
201
|
M.
Zhang, V. Kamavaram and R. G. Reddy, “New
Electrolytes for Aluminum Production-Ionic Liquids”, Journal of Metals,
pp. 54-57, 2003.
|
|
202
|
Q.
Zheng and R.G. Reddy, “Producing AlN-Al Alloy Composites by In-Situ Reacting
Bubbling Ammonia Gas with Molten Aluminum,” Affordable Metal Matrix
Composites for High Performance Applications II, edited by A. B. Pandey, K. L. Kendig, J. J.
Lewandowski and S. R. Shah, TMS, Warrendale, pp.
105-114, 2003.
|
|
203
|
J.
Font and R. G. Reddy, “Modeling of Impurity Distribution between Mattes and
Slags”, Vol. IV- Prometallurgy
of Copper, Ed: C. Diaz, C. Landolt and T. Utigard, Copper 2003, Chile, pp. 301-313, 2003.
|
|
204
|
R.
G. Reddy, Editorial, Journal of Phase Equilibria,
Vol.24, No. 3, pp. 206, 2003.
|
|
205
|
M.
F. Arenas and R. G. Reddy, “Nucleation and Growth Characteristics of Copper
Deposition on Permanent Cathode Materials”, Vol. V: Copper Electrorefining and Electrowinning,
Ed. J. E. Dutrizac and C. G. Clement, Copper
2003, Chile, pp. 569-582, 2003.
|
|
206
|
Qingjun Zheng and R.G. Reddy, “Kinetics of In-Situ
Formation of AlN in Al Alloy Melts by Bubbling
Ammonia Gas,” Metallurgical and Materials Transactions B, 34B,
pp.793-804, 2003.
|
|
207
|
N.
R. Thakkar and R. G. Reddy, “Thermal Plasma
Processing of Boron Carbide Fine Powders”, Powder Materials: Current
Research and Industrial Practices III, ed. F. D. S. Marquis, TMS, Warrendale, USA, pp. 47-60, 2003.
|
|
208
|
R.
G. Reddy, Z. Zhang, M. F. Arenas and D. M. Blake, “Thermal Stability and Corrosivity of Ionic Liquids as Thermal Energy Storage
Media”, High Temperature Materials and Processes, Vol. 22, No. 2,
pp. 87-94, 2003.
|
|
209
|
Qingjun Zheng and R.G. Reddy, “Influence of Magnesium on Nitridation of Molten Aluminum from Nitrogen Bubbling
Gas,” High Temperature Materials and Processes, Vol. 22, No. 2, pp.
63-71, 2003.
|
|
210
|
R.
G. Reddy, Y. Li and D. Mantha, “Effect of Niobium
addition on the Oxidation Behavior of a Ti3Al Alloy”, High
Temperature Materials and Processes, Vol. 22, No. 2, pp. 73-85, 2003.
|
|
211
|
R. G.
Reddy and L.V.M. Antony, “Processing of SiC Nanopowder using Thermal Plasma Technique”,
Nanotechnology & PM2:Scientific Challenges & Commericial Opportunities, compiled by: D. Apelian and T. N. Tiegs,
Metal Powder Industries Federation, Princeton, NJ, pp. 47-54, 2003.
|
|
212
|
A.
P. Joshi, M. F. Arenas and R. G. Reddy, “Surface Modification of Ti-6Al-4V
alloys (IMI 318) using Pulsed Nd-YAG
Laser”, Processing and Fabrication of Advanced Materials XI, ed. by:
T.S. Srivatsan and R.A. Varin,
ASM International, Materials Park, OH, pp. 335-344, 2003.
|
|
213
|
J.
D. Holbrey, W. M. Reichert, R. G. Reddy and R. D.
Rogers, “Heat Capacities of Ionic Liquids and Their Applications as Thermal
Fluids”, Ionic Liquids as Green Solvents: Progress and Prospects, ed. by:
R. D. Rogers and K. R. Seddon, ACS Symposium
Series 856, American Society of Metals, pp. 121-133, 2003.
|
|
214
|
Q.
Zheng and R. G. Reddy, “Chemical In-situ Processing
of Metal Matrix Composites,” Transactions of the Indian Institute of
Metals, Vol. 56, No. 6, pp. 533-547, 2003.
|
|
215
|
A.
Kumar and R. G. Reddy, “Polymer Electrolyte Membrane Fuel Cell with Metal
Foam in the Gas Flow-Field Distributor”, Journal of New Materials for
Electrochemical Systems, Vol. 6 (4), pp. 231-236, 2003.
|
|
216
|
R.
N. Reddy and R. G. Reddy, “Fundamental Studies on Electrochemical
Capacitors”, 2004 NSF Design, Service and Manufacturing Grantees and
Research Conference, ed. by R. Kovacevic,
Southern Methodist University, Dallas, TX, USA, pp. 1-11, 2004.
|
|
217
|
Qingjun Zheng and R.G. Reddy, “Mechanism of In-situ
Formation of AlN in Al Melt Using Nitrogen Gas,” Journal
of Materials Science, 39, pp. 141-149, 2004.
|
|
218
|
Z.
Zhang and R. G. Reddy, (Keynote Lecture), “Structure Model and
Properties of Alakali Borate Melts”, VII
International Conference on Molten Slags, Fluxes
and Salts, Symposium Series S 36, The South African Institute of Mining
and Metallurgy, pp. 827-834, 2004; Mineral Processing and Extractive
Metallurgy (Trans. Inst. Min. Metall. C), Vol. 114, C192-C199, 2005.
|
|
219
|
J.
M. Font and R.G. Reddy, “Modeling of Antimonate
Capacity in copper and Nickel Smelting Slags,”
VII International Conference on Molten Slags,
Fluxes and Salts, Symposium Series S 36, The South African Institute of
Mining and Metallurgy, pp. 557-561, 2004;
Mineral Processing and Extractive Metallurgy (Trans. Inst. Min. Metall.
C), Vol. 114, C160-C164, 2005.
|
|
220
|
R.
G. Reddy, V. L. Prabhu and D. Mantha,
“Recovery of Copper from Copper Blast Furnace Slag”, SME Annual
Publication, Littleton, CO, pre-print 04-31, pp. 1-7, 2004.
|
|
221
|
M.
Zhang, V. Kamavaram and R. G. Reddy, “Application
of Fluorinated Ionic Liquids in the Extraction of Aluminum”, Light Metals 2004,
Ed. A.T. Tabereaux, TMS,
Warrendale, USA, pp. 315-319, 2004.
|
|
222
|
R.
N. Reddy and R. G. Reddy, “Amorphous Manganese Oxide as Electrode Material
for Electrochemical Capacitors”, Advanced Materials for
Energy Conversion II, ed. by D. Chandra, R. G. Bautista and L. Schlapbach, TMS, Warrendale,
USA, pp. 355-361, 2004.
|
|
223
|
A.
Kumar and R. G. Reddy, “Recent Developments in Materials, Design and
Concepts for bipolar/end Plates in PEM Fuel Cells”, Advanced Materials for Energy
Conversion II, ed. by
D. Chandra, R. G. Bautista and L. Schlapbach, TMS,
Warrendale, USA, pp. 317-324, 2004.
|
|
224
|
Bora
Derin, Onuralp Yucel
and Ramana G. Reddy, “Modeling of Sulfide Capacities of Binary Titanate Slags”, EPD Congress
2004, ed. M. E. Schlesinger, TMS, Warrendale,
USA, pp.155-160, 2004.
|
|
225
|
A. Kumar
and R. G. Reddy, “Materials and Design development for bipolar/end plates
in Fuel Cells”, Journal of Power Sources, Vol. 129, pp. 62-67, 2004.
|
|
226
|
R.
N. Reddy and R. G. Reddy, “Synthesis and Electrochemical Characterization
of Amorphous MnO2 Electrochemical Capacitor Electrode Material”,
Journal of
Power Sources, Vol. 132, pp. 315-320, 2004.
|
|
227
|
R.
G. Reddy, (Plenary Lecture), “Environmental Engineering in
Extraction of Metals”, VI International Conference on “Clean Technologies
for the Mining Industry”, Concepcion, Chile, CD, pp. 1-15, 2004.
|
|
228
|
R.
G. Reddy, V. L. Prabhu and D. Mantha,
“Recovery of Valuable Metals from Copper Blast Furnace Slag”, Minerals
& Metallurgical Processing Journal, Vol. 21(3), pp. 125-132, 2004.
|
|
229
|
V.
Kamavaram and R. G. Reddy, “ Aluminum
Electrolysis in Ionic Liquids at Low Temperature”, Metal Separation
Technologies III, R. E. Aune and M. Kekkonen
(editors), Helsinki University of Technology, Espoo, Finland, pp. 143-151,
2004.
|
|
230
|
R.
R. Singareddy and R. G. Reddy, "Thermodynamics
of Oxygen and Sulfur in Ternary Liquid Alloys", High Temperature
Materials and Processes, Vol. 23 (2), pp. 133-145, 2004.
|
|
231
|
D.
Mantha, X. Wen and R.
G. Reddy, "High Temperature Oxidation of a Ti3Al alloy in
Argon-5% SO2 Environment", High Temperature Materials
and Processes, Vol. 23 (2), pp. 93-101, 2004.
|
|
232
|
R.
N. Reddy and R. G. Reddy, “Vanadium Oxide Electrode Materials for
Electrochemical Capacitors”, Power Sources for Transportation Applications
Proceedings of International Symposium, ed. A. R. Landgrebe,
T. Q. Duong, A. J. Salkind, K. Zaghib, V. S. Battaglia, Z. Ogumi, I. B. Weinstock,
ECS, USA, Vol. 2003-04, pp. 213-218, 2004.
|
|
233
|
S.
Tyagi, Q. Zheng and R.
G. Reddy, “In Situ Synthesis of AlN Reinforced
Magnesium Alloy Composites Using Gas Bubbling Method”, Aluminum
2004, edited by S. K. Das, TMS, Warrandale, pp.
63-72, 2004.
|
|
234
|
S. R.
Reddy and R. G. Reddy, "Derivation and Consistency of the Partial
Functions of a Quaternary System", High Temperature Materials and
Processes, Vol. 24 (4), pp. 261-290, 2004.
|
|
235
|
L.
Tong and R. G. Reddy, "Mathematical Modeling for Processing of Fine
Powders by Thermal Plasma", Development in Theoretical and Applied
Mechanics, SECTAM, Edited by H. Mahfuz and M. V. Hosur, Tuskegee, AL, USA, Vol. XXII, pp. 656-668, 2004.
|
|
236
|
Z.
Zhang and R. G. Reddy, "Experimental Determination and Modeling of
Viscosities in the Na2O-SiO2-B2O3
system", High Temperature Materials and Processes, Vol. 24 (4),
pp. 247-259, 2004.
|
|
237
|
R.
G. Reddy and S. R. Reddy, "Derivation and Consistency of the Partial
Functions of Ternary System Involving Interaction Coefficients", Zeitschrift Fur Metallkunde,
Vol. 95 (9), pp.806-812, 2004.
|
|
238
|
M.
F. Arenas, V. L. Acoff and R. G. Reddy, "Physical Properties of
Selected Brazing Filler Metals", Science and Technology of Welding
and Joining, vol. 9 (5), pp. 423-429, 2004.
|
|
239
|
R.
N. Reddy and R. G. Reddy, "Development of Cobalt- Manganese Oxide Electrodes
for Electrochemical Capacitors", Journal of New Materials for
Electrochemical Systems, Vol. 7, pp. 317-321, 2004.
|
|
240
|
P.
T. Velu and R. G. Reddy, "Calciothermic Reduction of Neodymium Fluoride", Light
Metals 2005, ed. Halvor Kvande,
TMS, Warrendale, USA, pp 1155-1159, 2005.
|
|
241
|
M.
Zhang, V. Kamavaram and R. G. Reddy,
"Aluminum Electrowinning in Ionic Liquids at
Low Temperature", Light Metals 2005, ed. Halvor
Kvande, TMS, Warrendale,
pp 583-588, 2005.
|
|
242
|
V.
Kamavaram and R. G. Reddy, "Thermal
Stabilities and Viscosities of Low Temperature Aluminum Electrorefining
Electrolytes: Di-alkyl Imidazolium Chloride Ionic
Liquids", Light Metals 2005, ed. Halvor
Kvande, TMS, Warrendale,
pp 501-505, 2005.
|
|
243
|
J.
C. Font and R. G. Reddy, "Arsenic Capacity of Copper Slags", (Plenary Lecture), Arsenic
Metallurgy, ed. R. G. Reddy and V. Ramachandran,
TMS, Warrendale, pp 51-60, 2005.
|
|
244
|
V.
Kamavaram and R. G. Reddy, "Recycling of Al
MMC using Ionic Liquids at Low Temperatures", EPD Congress 2005, ed.
M. Schlesinger, TMS, Warrendale, pp 1077-1086,
2005.
|
|
245
|
L.
Tong and R. G. Reddy, "Plasma Synthesis of Ultrafine Al(Ti)-TiC Composites", Materials Processing and Manufacturing
Division Sixth Global Innovations Proceedings, ed. T. R. Bieler, J. E. Carsley, H. L.
Fraser, J. W. Sears and J. E. Smugeresky, TMS, Warrendale, USA, pp 375-382, 2005.
|
|
246
|
V.
Kamavaram, D. Mantha
and R. G. Reddy, "Recycling of Aluminum metal-matrix composites using
Ionic Liquids: Effect of Process Variables on current efficiency and
deposit Characteristics", Electrochimica
Acta, Vol. 50 (17), pp. 3286-3295, 2005.
|
|
247
|
D.
Mantha and R. G. Reddy, "Viscosities of
Industrial Lead Blast Furnace Slags", High
Temperature Materials and Processes, Vol. 24 (1), pp. 73-78, 2005.
|
|
248
|
J.
Y. Yen, M. Divakar, L. Evrard,
M. Van Camp and R. G. Reddy, "Effect of Composition and Temperature on
Viscosities of Lead Blast Furnace Slags", Minerals
& Metallurgical Processing, Vol. 22 (3), pp. 165-170, 2006.
|
|
249
|
M.
Zhang, V. Kamavaram and R. G. Reddy,
"Thermodynamic Properties of 1-butyl-3-methylimidazolium Chloride
(C4mim[Cl}) Ionic Liquid", Journal of
Phase Equilibria and Diffusion, Vol. 26, No.
2, pp. 124-130, 2005.
|
|
250
|
V.
V. Nikam and R. G. Reddy, "Corrosion studies
of Copper-Beryllium Alloy in Simulated Polymer Electrolyte Membrane Fuel
Cell Environment”, Journal of Power Sources, Vol. 152C, pp 146-155,
2005.
|
|
251
|
R.
G. Reddy, "Fundamental Studies on Novel Electrochemical
Capacitors", 2005 NSF DMII Grantees Conference Proceedings,
Scottsdale, AZ, CD-ROM, 4 pp., 2005.
|
|
252
|
R.
G. Reddy, "Fundamental Studies on Intermetallic
Aluminides", 2005 NSF DMII Grantees
Conference Proceedings, Scottsdale, AZ, CD-ROM, 4 pp., 2005.
|
|
253
|
L.
Tong and R. G. Reddy, "Synthesis of Titanium Carbide Nanopoweders by Thermal Plasma", Scripta Materialia,
Vol. 52, pp. 1253-1258, 2005.
|
|
254
|
D.
Mantha and R. G. Reddy, "Viscosities of
Lead-Copper Converter Slags", High
Temperature Materials and Processes, Vol. 24 (3), pp. 153-157, 2005.
|
|
255
|
B.
R. Padhy and R. G. Reddy, "Stainless Steel
Bipolar Plates for Direct Methanol Fuel Cells (DMFC)", Materials for
the Hydrogen Economy, I. Anderson, J. Petrovic,
T. Adams, G. Sandrock, C. Legzdins,
J. Stevenson, Z. G. Yang, (editors), Materials Science &
Technology, ASM International, Materials Park, Ohio, USA, pp. 133-139, 2005.
|
|
256
|
D.
Livingston, D. Mantha, and R. G. Reddy,
"Oxidation Kinetics of Ti3Al-2.63 at % Nb
Alloy", High Temperature Materials and Processes, Vol. 24, No.
4, pp. 259-267, 2005.
|
|
257
|
V.
V. Nikam and R. G. Reddy, "Performance of
Polymer Electrolyte Membrane Fuel Cell Stack With Corrugated Sheet Metal
bipolar/End Plates", Materials for the Hydrogen Economy, I. Anderson,
J. Petrovic, T. Adams, G. Sandrock,
C. Legzdins, J. Stevenson, Z. G. Yang, (editors),
Materials Science & Technology, ASM International, Materials
Park, Ohio, USA, pp. 113-117, 2005.
|
|
258
|
S.
Sen, C. S. Ray and R. G. Reddy, "Processing
of Lunar Soil Simulant for Space Exploration
Applications", Journal of Materials Science and Engineering A,
Vol. 413-414, pp. 592-597, 2005.
|
|
259
|
B.
Derin, O. Yucel and R. G. Reddy, "Sulfide
Capacities of PbO-SiO2 and PbO-SiO2-AlO1.5 (sat.) Slags",
Lead & Zinc 2005, International Symposium on Lead and Zinc
Processing Conference proceedings, Mining and Materials Processing
Institute of Japan (MMIJ), Kyoto, Japan, pp. 1279-1287, 2005.
|
|
260
|
V.
Palaniyandi, M. Shamsuzzoha,
E. T. Ada, G. Zangari
and R. G. Reddy, "Microstructural Evolution
of Nickel Nanoparticle Catalysts supported on
Gadolinium-doped Ceria during Autothermal
Reforming of Iso-octane," Journal of
Electronic Materials, Vol. 35 (5), pp. 814-821, 2006.
|
|
261
|
B.
R. Padhy and Ramana G. Reddy, "Performance
of DMFC with SS 316 Bipolar/End Plates", Journal of Power Sources,
Vol. 153 (1), pp. 125-129, 2006.
|
|
262
|
A.
Kumar and R.G. Reddy, "Effect of gas flow-field design in the
bipolar/end plates on the steady and transient state performance of polymer
electrolyte membrane fuel cells", Journal of Power Sources,
Vol. 155, pp. 264-271, 2006.
|
|
263
|
R.
N. Reddy and R. G. Reddy, "Porous Structured Vanadium Oxide Material
for Electrochemical Capacitors", Journal of Power Sources, Vol.
156 (2), pp. 700-704, 2006.
|
|
264
|
M.
Shamsuzzoha, E. T. Ada
and R. G. Reddy, "Effect of Reducing Atmosphere on Structure of Ceria
Supported Nano-Pt catalysts", Journal of
Electronic Materials, Vol. 35 (5), pp. 808-813, 2006.
|
|
265
|
D.
Livingston, D. Mantha and R. G. Reddy,
"Oxidation Studies on Ti3Al- Mo Alloys", Titanium Alloys for High
Temperature Applications – A Symposium Dedicated to the Memory of Dr. Martin
Blackburn, edited by M. Peretti, D. Eylon, U. Habel, and G. C. Keijzers, TMS (The Minerals, Metals & Materials
Society), Warrendale, USA, pp. 113-122, 2006.
|
|
266
|
R.
G. Reddy, (invited paper), "In-Situ Processing of Lightweight
Alloy Composites", Solidification Processing of Metal Matrix
Composites – Rohatgi Honorary Symposium, edited
by N. Gupta and W. H. Hunt, TMS, Warrendale, USA,
pp. 27-37, 2006.
|
|
267
|
M.
Zhang and R. G. Reddy, "Ionic Liquids Electrowinning
of Aluminum in Batch Mode Cells", Light Metals, edited by T.
Galloway, TMS, Warrendale, USA, pp. 451-455, 2006.
|
|
268
|
P.
George and R. G. Reddy, "EMF Study of Nb-Al Intermetallics", EPD Congress 2006, edited by: S.
M. Howard, R. L. Stephens, C. J. Newman, J.-Y. J. Hawang,
A. M. Gokkale, T. T. Chen, T. P. Battle, M. L.
Free, B.R. Davis, C. L. Harris, H. Henein, P. N. Anyalebechi, A. C. Powell, G. K. Krumdick,
and C. K. Belt, TMS, Warrendale, USA, pp.
841-845, 2006.
|
|
269
|
R.
R. Nagireddy and R. G. Reddy, "Polymer Derived
Carbon Electrode Materials for Electrochemical Capacitors", Advanced
Materials for Energy Conversion III: A Symposium in Honor of Gary Sandrock, Louis Schlapback,
and Seijirau Suda;
Editors: D.Chandra, J. Petrovic,
R. Bautista, and M. A. Imam; TMS, Warrendale,
USA, pp.245-250, 2006.
|
|
270
|
V.
Kamavaram, Q. Zheng
and R. G. Reddy, "Oxidation Behavior of Fe-Cr-Al Alloy: Metallic
Interconnects for Solid Oxide Fuel Cell Applications", Materials in
Clean Power Systems: Applications, Corrosion, and Protection, edited by Z.
G. Yang, K. S. Weil, M. Brady, TMS, Warrendale,
USA, pp. 61-69, 2006.
|
|
271
|
R.
G. Reddy, "Ionic Liquids: How well do we know them?",
editorial, Journal of Phase Equilibria and
Diffusion, Vol. 27, No.3, pp. 210-211, 2006.
|
|
272
|
V.
V. Nikam and R. G. Reddy, "Investigation of
Novel Flow Field Design for PEMFC Bipolar Plates", NHA Annual Hydrogen
Conference 2006-Global Progress Toward Clean Energy, 11 pp, 2006.
|
|
273
|
L.
Tong and R. G. Reddy, "The processing of Nanopowders
by Thermal Plasma Technology", Journal of Metals, pp. 62-66,
April 2006.
|
|
274
|
L.
Tong and R. G. Reddy, "In-Situ Synthesis of TiC-Al
(Ti) Nanocomposites by Thermal Plasma
Technology", Metallurgical and Materials Transactions B, Vol.
37B, pp. 531-539, 2006.
|
|
275
|
R.
G. Reddy, "Fuel Cell and Hydrogen Economy", Journal of
Materials Engineering and Performance, Vol. 15(4), pp. 474-483, 2006.
|
|
276
|
V.
V. Nikam and R. G. Reddy, "Corrugated
Bipolar Sheets as Fuel Distributors in PEMFC", International
Journal of Hydrogen Energy, Vol. 31, pp. 1863-1873, 2006.
|
|
277
|
M.
Zhang and R. G. Reddy, (invited paper) "Aluminum Extraction Via
Batch Recirculation Electrolysis in Ionic Liquids", Advanced
Processing of Metals and Materials”, editors: F. Kongoli
and R. G. Reddy, The Minerals, Metals and Materials Society (TMS), Warrendale, USA, Vol. 4, pp. 237-246, 2006.
|
|
278
|
B.
Derin, O. Yucel and R. G. Reddy, (invited
paper) "Predicting of Sulfide Capacities of Industrial Lead
Smelting Slags", Advanced Processing of
Metals and Materials, editors: F. Kongoli and R.
G. Reddy, The Minerals, Metals and Materials Society (TMS), Warrendale, USA, Vol. 1, pp. 237-244, 2006.
|
|
279
|
V. K. Namilakonda
and R. G. Reddy, "Processing of Al alloy-AlN
Metal Matrix Composites", Advanced Processing of Metals and Materials,
editors: F. Kongoli and R. G. Reddy, The
Minerals, Metals and Materials Society (TMS), Warrendale,
USA, Vol. 3, pp. 121-128, 2006.
|
|
280
|
V. Kamavaram
and R. G. Reddy, (Keynote Paper) "Aluminum Extraction in Ionic
Liquids at Low Temperature", Advanced Processing of Metals and
Materials, Vol. 4, New improved and Exiting Technologies, Non-ferrous
Materials Extraction and Processing, Sohn
International Symposium, editors: F. Kongoli and
R. G. Reddy, The Minerals, Metals and Materials Society (TMS), Warrendale, USA, Vol. 4, pp. 97-108, 2006.
|
|
281
|
K.
Cook, B. Wu and R. G. Reddy, "Modeling of Centrifugal Casting of
Aluminum Alloy Components", International Journal for Manufacturing
Science and Production, Vol. 7 (1), pp. 49-59, 2006.
|
|
282
|
V.
K. Namilakonda and R. G. Reddy, "Effect of
Processing Parameters on Al-AlN Matal Matrix Composites", Innovative Processing
and Synthesis of Ceramics, Glasses and Composites, editors: N. P. Bansal and J. P. Singh, Materials Science and
Technology, ASM International, Materials Park, Ohio, USA, MS&T’06 CD,
pp. 435-443, 2006.
|
|
283
|
M. Zhang, R. G. Reddy,
"Recycling of Aluminum Alloy Waste via Ionic Liquid
Electrolytes", Green Engineering for Materials Processing, eds.
Heather Kaminsky, Sharon Marra,
Carol Jantzen, Riad Asfahani, Materials Science & Technology, ASM
International, Materials Park, Ohio, USA, MS&T’06 CD, pp. 153-161, 2006.
|
|
284
|
M. Zhang, R. G. Reddy,
"Electrical Field and Current Density Distribution Modeling of
Aluminum Electrodeposition in Ionic Liquid
Electrolytes", ECS Trans. Vol. 1 (16), pp. 47-60, 2006.
|
|
285
|
V.
V. Nikam and R. G. Reddy, "Copper Alloy
Bipolar Plates for Polymer Electrolyte membrane Fuel Cells", Electrochemical
Acta, 51, pp. 6338-6345, 2006.
|
|
286
|
M.
Zhang, V. Kamavaram and R. G. Reddy, "Ionic
Liquid Metallurgy: Novel Electrolytes for Metals Extraction and refining
Technology", Minerals & Metallurgical Processing, Vol. 23
(4), pp. 177-186, 2006.
|
|
287
|
D.
Livingston, D. Mantha, and R. G. Reddy,
"Short-term Oxidation Kinetics of Ti3Al-1.34 at% Nb
Alloy in Pure Oxygen", High Temperature Materials and Processes,
Vol. 25 (3), pp. 121-128, 2006.
|
|
288
|
B.
R. Padhy, R. G. Reddy and E. Ada,
"Performance of DMFC with TiN Coated
Aluminum Bipolar/end plates", Durability and Reliability of
Low-Temperature Fuel Cells Systems, editor T. Jarvi,
ECS Transactions, Vol. 1 (8), pp. 447-456, 2006.
|
|
289
|
L.
Tong and R. G. Reddy, "Thermal Plasma Synthesis of SiC
Nano-powders / Nano-fibers",
Materials Research Bulletin, 41, pp. 2303 – 2310, 2006.
|
|
290
|
Y.
Lu and R. G. Reddy, "The Electrochemical Behavior of Cobalt Phthalocyanine/Platinum as Methanol-resistant
oxygen-Reduction Electrocatalysts for DMFC",
Electrochimica Acta,
Vol. 52, pp. 2562-2569, 2007.
|
|
291
|
N.
Thakkar and R. G. Reddy, "Thermal Plasma
Production of B4C Nanopowders", International
Journal for Manufacturing Science and Production, Vol. 7 (2), pp.
87-100, 2006.
|
|
292
|
D.
Pradhan, V. Kamavaram,
R. R. Nagireddy, R. G. Reddy, A. Menon and R. K. Mishra,
"Electrochemical Studies on Platinum Dissolution from Ag-Au-Pt alloy
in Dilute Nitric Acid", IPMI 30th conference proceedings, editors: D.
Andres and R. K. Mishra, CD, IPMI, Pensacola, FL,
pp. 1-7, 2006.
|
|
293
|
R. N. Reddy and R. G. Reddy,
“Electrochemical Properties of Carbon Derived from Sol-Gel Catachol-Formaldehyde Gels”, ECS Transactions, Vol. 1
(14), pp.61-66, 2006.
|
|
294
|
D.
Pradhan and R. G. Reddy, "Production of
Al-Ti Alloys using Ionic Liquid Electrolysis at Low Temperatures,"
Innovation in Titanium Technology: Novel Materials and processes I,
editors: M. N. Gungor, M. A. Imam, F. H. Froes,
TMS, Warrendale, USA, pp. 79-86, 2007.
|
|
295
|
C.
Williams, D. Mantha, and R. G. Reddy, "High
Temperature Oxidation of Ti3Al-4at%Nb Alloy in Pure Oxygen,"
Innovations in Titanium Technology: Microstructure and Properties II,
editors: M. N. Gungor, M. A. Imam, F. H. Froes,
TMS, Warrendale, USA, pp. 235-244, 2007.
|
|
296
|
M.
Zhang and R. G. Reddy, "Application of [C4min][Tf2N] Ionic Liquid as Thermal Storage and
Heat Transfer Fluids," editor J. Weidner, ECS Transactions,
Vol. 2 (28), pp. 27-32, 2007.
|
|
297
|
M.
Zhang and R. G. Reddy, "Ionic Liquid Electrowinning
of Aluminum – Modeling of Batch Reactor," Aluminum Reduction
Technology: Cell Fundamentals, Phenomena and Alternatives, Light Metals,
editor: Morten Sorlie,
TMS, Warrendale, USA, pp. 385-390, 2007.
|
|
298
|
Y.
Lu and R. G. Reddy, “Electrochemical Behavior of Cobalt Phthalocyanine/Platinum
as DMFC Anodic Catalyst,” Materials in Clean Power Systems II: Fuel Cells,
Solar, and Hydrogen-Based Technologies, editors: Zhenguo
“Gary” Yang, M. Brady, K. S. Weil, Yong-Ho Sohn,
TMS, Warrendale, USA, pp. 11-18, 2007.
|
|
299
|
S. C. Parida
and R. G. Reddy, "Thermodynamic Properties of CaTiF5,"
Journal of Chemical Thermodynamics, Vol. 39(6), pp. 888-892, 2007.
|
|
300
|
P. George, S. Parida and R. G. Reddy, "Thermodynamic Studies of Nb-Al System", Metallurgical and Materials
Transactions B, Vol. 38(1), pp.85-91, 2007.
|
|
301
|
M. Zhang and Ramana G. Reddy,
Invited Lecture, “Modeling of Low Temperature Aluminum Electrowinning
in Chloroaluminate Ionic Liquid Electrolytes”
Proceedings International Conference, Advances in Metallurgical Processes
and Materials, National Metallurgical Academy, Ukraine, Dnipropetrovsk,
Ukraine, Vol. 2, pp. 15-29, 2007.
|
|
302
|
V. V. Nikam and R. G. Reddy, “Effect of Fuel Conditions on Performance of Novel PEMFC Flow Field Design”, Energy: Fuel Cells: Materials, Processing, Manufacturing and Power Management Technologies, editors: P. Singh, A.M. Azad, D. C. Collins, P. N. Kumta, C. Legzdins, A. Manthiram, A. Manivannan, S. K. Sundaram and Z. G. Yang, ASM International, Materials Park, Ohio, USA MS7T’07, pp. 285-293, 2007.
|
|
303
|
M. Zhang and R. G. Reddy,
“Evaluation of Ionic Liquids as Heat Transfer Materials in Thermal Storage
Systems”, Energy: Energy Materials, editors: F. Dogan,
M. Awano, D. Singh and B. Tuttle, ASM
International, Materials Park, Ohio, USA MS&T’07, pp. 151-160, 2007.
|
|
304
|
Ravinder R. Nagireddy and R. G. Reddy,
“Analytical solution for the voltage distribution in one-dimensional porous
electrode subjected to cyclic voltammetric (CV)
conditions”, Electrochimica Acta, Vol. 53, pp. 575-583, 2007.
|
|
305
|
R. G. Reddy and V. Kumar,
“Chemical in-situ Synthesis of Aluminum Alloy Composites” Materials
Science Forum, Vols. 561-565, pp. 701-704, 2007.
|
|
306
|
V. V. Nikam,
R. G. Reddy, S. R. Collins, P. C. Williams, G. H. Schiroky
and G. W. Henrich, “Corrosion Resistant Low
Temperature Carburized SS 316 as Bipolar Plate Material for PEMFC
Application”, Electrochimica Acta, Vol. 53, pp. 2743-2750, 2008.
|
|
307
|
Ramana G. Reddy, “Reducing CO2
using Room Temperature Ionic Liquids”, Journal of Metals, pp. 33,
February 2008.
|
|
308
|
M. Zhang and Ramana G. Reddy,
“CO2 Free Electrochemical Process for Production of Light Metals Using
Ionic Liquids as Electrolytes”, Carbon Dioxide Reduction Metallurgy,
editors: N. R. Neelameggham and R. G. Reddy, TMS,
Warrendale, USA, pp. 161-170, 2008.
|
|
309
|
D. Pradhan
and R. G. Reddy, “Low Temperature Electrochemical Synthesis of Ti-Al Alloys
using Ionic Liquid Electrolytes”, Supplemental Proceedings-General Paper
selections, editors: Anne Kvithyld and N.
R. Neelameggham, TMS, Warrendale,
USA, CD, pp. 345-352, 2008.
|
|
310
|
V. Kamavaram
and R. G. Reddy, “Thermal Stabilities of Di-alkylimidazolium
Chloride Ionic Liquids”, International Journal of Thermal Sciences,
Vol. 47, pp.773-777, 2008.
|
|
311
|
Y. Lu and R. G. Reddy,
"Effects of Cobalt Phthalocyanine on Pt/C as
the Cathodic Catalyst in DMFC",
Electrochemistry of Novel Electrode Materials for Energy Conversion and
Storage, ECS Transactions, Volume 6, pp.
105-116, 2008.
|
|
312
|
Y. Lu and R. G. Reddy, “Electrocatalytic Properties of Carbon Supported Cobalt Phthalocyanine-Platinum for Methanol Electrooxidation”, International Journal of Hydrogen
Energy, Vol. 33, pp. 3930-3937, 2008.
|
|
313
|
Y.
Lu and R. G. Reddy, “Development of Passive Air-breathing DMFC with Low
Catalysts Loading”, Fuel Cells: Materials, Processing, Manufacturing,
Balance of Plant Systems Operation, MS&T’08, ASM International,
Materials Park, Ohio, USA, CD, pp.339-348, 2008.
|
|
314
|
Y.
Lu and Ramana G. Reddy, “Extraction of Metals and Oxygen from Lunar Soil”, High Temperature Materials and Processes,
Vol. 27 (4), pp. 223-233, 2008.
|
|
315
|
M.
Ramachandran and R. G. Reddy, “Effect of Nb and Mo on the Oxidation Rates of Ti-Al Intermetallics”, High
Temperature Materials and Processes, Vol. 27 (4), pp. 235-242, 2008.
|
|
316
|
D. Pradhan,
R. G. Reddy and A. Lahiri, “Low Temperatures
Production of Ti-Al Alloys using Ionic Liquid Electrolytes: Effect of
Process Variables on Current Efficiency and Deposit Morphology”, Metallurgical
and Materials Transactions B, Vol. 40 (1), pp. 114-122, 2009.
|
|
317
|
A. Yahya
and Ramana G. Reddy, “Sulfide Capacities of CaO-MgO-AlO1.5, MgO-MnO- AlO1.5 and CaO-MgO-MnO-AlO1.5
Slags”, Molten 2009, Santiago, Chile, CD, pp. 643-651, 2009. Trans. Inst. Min. Metall. C, Vol. 120 (1), pp. 45-48, 2011.
|
|
318
|
Mingming Zhang and Ramana Reddy, “Thermodynamic Properties of
C4mim[tf2N] Ionic”, Molten 2009, Santiago, Chile, CD, pp. 643-651, 2009. Trans. Inst. Min. Metall. C , Vol. 119 (2), pp. 71-76, 2010.
|
|
319
|
D. Pradhan
and R. G. Reddy, “Electrochemical Production of Ti-Al alloys using TiCl4-AlCl3-1-butyl-3-methyl
imidazolium chloride (BmimCl)
electrolytes”, Electrochimica Acta, Vol. 54 (6), pp. 1874-1880, 2009.
|
|
320
|
M. Shamsuzzoha,
E. T. Ada and R. G. Reddy, “Structural
information of α-alumina supported Cobalt Nanoparticles
during auto-thermal reforming of Iso-octane”, Supplemental
Proceedings: Volume 2: Materials Characterization, Computation and
Modeling, TMS, Warrendale, CD, pp. 181-186, 2009.
|
|
321
|
D. Pradhan
and R. G. Reddy, “Effect of Electrode Physical Properties on Dendritic Deposition of Aluminum using EmimCl-AlCl3
ionic liquid electrolyte, Energy Technology Perspectives: Carbon dioxide
Reduction, TMS Warrendale, CD, pp. 17-24, 2009.
|
|
322
|
R. Das and R. G. Reddy,
“Computational Modeling of a Planar 3-D SOFC and the Effect of Materials
Properties on the Anode Performance,” International Journal for
Manufacturing Science and Production, vol. 10(1), 43-52, 2009.
|
|
323
|
R.
G. Reddy, “Novel Applications of Ionic Liquids in Materials Processing”,
Advanced Structural and Functional Materials Design 2008, Journal of Physics: Conference Series
(JPCS), Vol. 165 (012076), pp. 1-6, 2009.
|
|
324
|
Y. Lu, A. Highsmith
and R. G. Reddy, “Manufactuing, Assembling and Testing
of Micro-PEM Fuel Cells,” Supplemental Proceedings: Volume 2: Materials
Characterization, Computation and Modeling, TMS, Warrendale,
CD, pp. 161-167, 2009.
|
|
325
|
R. Das and R. G. Reddy,
“Development of Anode Materials for Solid Oxide Fuel Cells-A Review”, International
Journal for Manufacturing Science and Production, Vol. 10(1), pp. 53-68,
2009.
|
|
326
|
Y. Lu and R. G. Reddy,
“Investigation of Micro PEM Fuel Cell Using Experimental and Modeling
Methods,” Electrochimica Acta, vol. 54, pp. 3952-3959, 2009.
|
|
327
|
D. Pradhan, D. Mantha and R. G. Reddy,
“The effect of electrode surface modification and cathode overpotential on deposit characteristics in aluminum electrorefining using EMIC-AlCl3 ionic
liquid electrolyte”, Electrochimica Acta, vol. 54 (26), pp. 6661-6667, 2009.
|
|
328
|
Y. Lu and R. G. Reddy, “Manufacturing of Bipolar Plates for Micro-Fuel
cells,” International Journal for Manufacturing Science and Production, vol. 10, No. 3-4, pp. 239-248, 2009.
|
|
329 |
D. Pradhan, D. Mantha and R. G. Reddy, “Thermodynamics of Interfacial
Properties between Liquid Iron, Liquid Silicon and Solid Oxide Substrates,”
High Temperature Materials and Processes,
vol. 28 (4), pp. 203-210, 2009.
|
|
330 |
D. Pradhan and R. G. Reddy, “Effect of variables on deposit
characteristics of aluminum from EMIC-AlCl3 ionic liquid electrolytes,”
TMS Proceedings-CD, TMS, Warrendale, pp. 67-73, 2010.
|
|
331 |
Y. Lu and R. G. Reddy, “Effect of flow field and scan rates on performance
of micro-DMFC,” Materials Science Forum,
vols. 654-656, pp. 2879-2882, 2010.
|
|
332 |
D. Pradhan, R. G. Reddy and D. Mantha, “Dendrite free aluminum
electrodeposition using ionic liquid electrolyte,”
Proceedings of the Sadoway 60 Symposium, MIT, Cambridge, Massachusetts, USA, pp.106-112, 2010.
|
|
333 |
D. Pradhan and R. G. Reddy, ̴Interfacial properties prediction of liquid
iron-Si inclusion-MgO refractory,” Materials Science Forum,
vols. 654-656, pp. 390-393, 2010.
|
|
334 |
Y. Lu and R G Reddy, “Performance of Micro-PEM Fuel Cells with Different
Flow Fields,” Journal of Power Sources,
vol. 195, pp. 503-508, 2010.
|
|
335 |
M. Ramachandran, D. Mantha, C. Williams, and R. G. Reddy,
“Oxidation and Diffusion in Ti-Al- (Mo, Nb) intermetallics,”
Metallurgical and Materials Transactions A, Vol. 42A, pp. 202-210, 2011.
|
|
336 |
B. Derin, O. Yucel and R. G. Reddy, “Sulfide Capacity Modeling of
FeOx-MO-SiO2 (MO=CaO, MnO, MgO) Melts,”
Minerals & Metallurgical Processing, Vol. 28(1), pp. 33-36, 2010.
|
|
337
|
Y. Lu, D. Mantha and R. G. Reddy, “Thermodynamic Analysis on Lunar Soil
Reduced by Hydrogen,” Metallurgical and Materials Transactions B,
vol. 41B, pp. 1321-1327, 2010.
|
|
338 |
Z. Shi and R. G. Reddy, “Electrodeposition of Pb-Te-Tl Thermoelectric Materials” editors: N. R. Neelameggham, , Cynthia K. Belt, Mark Jolly, Ramana G. Reddy and James A. Yurko , Energy Technology 2011, John Wiley & Sons, Inc., New Jersey, USA, ISBN 978-1-11803-651-8, TMS Warrendale, PA, USA, pp. 159-164, 2011.
|
|
339
|
M. Ramachandran and R. G. Reddy, “Thermodynamics of Nanoscale Materials, ” Journal of Metals, Vol. 63, No. 1, pp. 44-46, 2011.
|
|
340 |
Baichuan Hu, James K. Baird, Randi D. Richey, and Ramana G. Reddy, “A chemical test of the principle of critical point universality: The solubility of nickel (II) oxide in isobutyric acid + water near the consolute point”,
The Journal of Chemical Physics, 134, pp. 154505 (1-7), 2011.
|
|
341
|
R. Padilla, R. Villa. M. C. Ruiz and R. G. Reddy, “Kinetics of the Oxidation of Bismuthinite in Oxygen-Nitrogen Atmospheres”, Metallurgical and Materials Transactions B, Vol. 42B (5), pp. 1017-1022, 2011.
|
|
342 |
M. Ramachandran and R. G. Reddy, Production of Nanoscale Titanium Diboride Powders, Journal for Manufacturing Science & Production (JMSP), Vol. 11 (1-3), pp. 15-22, 2011.
|
|
343
|
Z. Zhang and R. G. Reddy, Experimental Studies on Flash Oxidation of Chalcopyrite, Separation Technologies for Minerals, Coal and Earth Resources, C. A. Young and G. H. Luttrell (editors), SME, ISBN 978-0-87335-339-7, pp.325-331, 2012.
|
|
344 |
Tao Wang and R. G. Reddy,Thermal Stability of Low Melting Point NaNO3NaNO2 KNO3 Ternary Molten Salts for Thermal Energy Storage, Preprint 12-112, CD, SME, Littleton, CO, USA, pp.1-4, 2012.
|
|
345
|
R. G. Reddy, Low Temperature production of zinc from zinc oxide, Carbon Management Technology Conference, CMTC 151684 PP, Orlando, FL, pp. 1-6, 2012.
|
|
346 |
Ramana G. Reddy, Tao Wang and Divakar Mantha, Thermodynamic Properties of potassium nitrate – magnesium nitrate compound [2KNO3.Mg(NO3)2], Thermochemica Acta, 531, pp. 6-11, 2012.
|
|
347
|
Tao Wang, Divakar Mantha, and Ramana G. Reddy, Thermal stability of the eutectic composition in LiNO3–NaNO3–KNO3 ternary system used for thermal energy storage, Solar Energy Materials &Solar Cells (SOLMAT), 100, pp. 162-168, 2012.
|
|
348 |
T. Wang, D. Mantha and R. G. Reddy, High Thermal Energy Storage Density LiNO3-NaNO3-KNO3-KNO2 quaternary Molten Salt for Parabolic Trough Solar Power Generation, Energy Technology 2012: Carbon Dioxide Management and Other Technologies, TMS, Warrendale, PA, USA, pp. 73-84, 2012.
|
|
349
|
D. Mantha, T. Wang and R. G. Reddy, Thermodynamic Modeling of Eutectic Point in the LiNO3-NaNO3-KNO3 Ternary System, Journal of Phase Diagrams and Diffusion (JPED), 33 (2), pp. 110-114, 2012.
|
|
350 |
Tao Wang, Srinath Viswanathan, Divakar Mantha, and Ramana G. Reddy, Thermal conductivity of the ternary eutectic LiNO3NaNO3KNO3 salt mixture in the solid state using a simple inverse method, Solar Energy Materials &Solar Cells (SOLMAT), 102, pp. 201-207, 2012.
|
|
351
|
Debabrata Pradhan and Ramana G. Reddy, Dendrite-Free Aluminum Electrodeposition from AlCl3-1-Ethyl-3-Methyl-Imidazolium Chloride Ionic Liquid Electrolytes, Metallurgical and Materials Transactions B, Vol. 43B, pp. 519-531, 2012.
|
|
|
|
|
|
|
|